Seguridad Wireless - Wifi
Suite Seguridad Wireless => Colaboracion y desarrollo de nuestras lives => Mensaje iniciado por: USUARIONUEVO en 18-09-2016, 08:58 (Domingo)
-
Este post es solo para vk496 , no os metais a trastear que rompereis sistema ;D
Ahora que parece que ya tenemos dominado lo de efi y secure boot , la cosa es tener nuestro grub , y no usar el de ubuntu.
He compilado uno , aplicando los parches ubuntu para probar.
http://www.mediafire.com/download/9yvcicib5jcdifb/grub-2.02_beta2-x86_64-1sw.xzm
Instrucciones
1 - eliminar los paquetes grub de ubuntu
removepkg grub-common-2.02_beta2_36ubuntu3-amd64-1sw
removepkg grub-efi-amd64-2.02_beta2_36ubuntu3.3-amd64-1sw
removepkg grub-efi-amd64-bin-2.02_beta2_36ubuntu3-amd64-1sw
removepkg grub2-common-2.02_beta2_36ubuntu3.3-amd64-1sw
removepkg grub_extras_signed-1.0.0-x86_64-1sw
instalar el xzm t regenerar los efi.signed DESDE WIFISLAX , y testear.
He probado el modo live y funcionaba perfecto , ademas el fichero bootx64.efi ya no pone ubuntu ..si no wifislax .. (si lo regeneramos con el grub nuestro)
solo falta ver si puede generarse los efi signed y si funcionan bajo secure boot.
si todo esta bien .. por ultimo modificar el instalador ya que los signed ya no estaran en /usr/lib/... si no en /usr/lib64/...
-
Confirmo que eliminando todo lo de ubuntu y regenerando los archivos con tu xzm funciona perfectamente el SecureBoot.
Salu2
-
ok , entonces por favor pásame los ficheros nuevos signed , para que ya definitivamente no salga mas lo de "Ubuntu" en el grub y los pondré en la misma ruta de antes pero con el 64 en el "lib" , asi también nos libramos del simbolico en devmapper.
solo necesito los efi.signed ..creados desde wifislax , si los generas en Ubuntu , se colara otra dez en el nombre del grub ,ya que lo generas allí , debe ser desde wifislax.
gracias men.
puedes verificarlo usando grep , sobre los efi.signed buscando "Ubuntu", veras que los de ahora si dan positivo.
-
de momento ..
en la iso ya he metido nuestro grub , y he regenerado el bootx64.efi del modo live
los sigend los he movido a la misma ruta pero con lib64
y he hecho un push al scrip grubinstaller con las rutas hacia el lib64
solo me faltara para rematar , los dos ficheros efi.signed bootx64.efi.signed y el grubx64.efi.signed y ya estara todo.
-
que cosa mas rara ???
he montado todo en la iso y he reinstalado en modo bios ..
el grub no muestra el theme ??? :P
EDIT: Fallo estupido ... ir a /etc/default/grub y cambiar
# Font used on the graphical terminal:
#GRUB_FONT=/usr/share/grub/dejavusansmono.pf2
# Font used on the graphical terminal:
GRUB_FONT=/usr/share/grub/dejavusansmono.pf2
-
Ok.
Tmbn recuerda, que el cargador efi de la Live tiene que ir firmado. Es decir, el caso típico:
Tienes SecureBoot y arrancas la Live. Si tiene el shim con con el grub instalado, te saldrá error y habrá que seguir los pasos para instalar el certificado de Wifislax (habrá que crear un manual con capturas).
En caso de que arranque por UEFI pero sin SecureBoot, no notará nada, puesto que shim lanzará el grub sin problemas.
Voy a regenerar el del hdd y el Live y te lo dejo aquí.
PD: en la Live, hay que elegir un lugar fijo donde vamos a tener el certificado de Wifislax
Salu2
-
Ok.
Tmbn recuerda, que el cargador efi de la Live tiene que ir firmado. Es decir, el caso típico:
Tienes SecureBoot y arrancas la Live. Si tiene el shim con con el grub instalado, te saldrá error y habrá que seguir los pasos para instalar el certificado de Wifislax (habrá que crear un manual con capturas).
En caso de que arranque por UEFI pero sin SecureBoot, no notará nada, puesto que shim lanzará el grub sin problemas.
Voy a regenerar el del hdd y el Live y te lo dejo aquí.
PD: en la Live, hay que elegir un lugar fijo donde vamos a tener el certificado de Wifislax
Salu2
easy , todo lo que tiene que ver con efi/uefi secur boot.. en modo live estara en
/EFI/BOOT/
donde esta todo lo demas y donde ya esta ahora mismo el bootx64.efi
Ahora me asalta la duda , .. ¿en el modo live /EFI/BOOT donde tengo el bootx64.efi ... ese hay que firmarlo ? ..si es asi ..abra que modificar el make-grub.sh , para que si lo regeneramos , este firmado ,por que si me das uno y despues ejecuto el script, creo una regresion al "sin firmar"
creo que se me entiende.
-
Ok.
Tmbn recuerda, que el cargador efi de la Live tiene que ir firmado. Es decir, el caso típico:
Tienes SecureBoot y arrancas la Live. Si tiene el shim con con el grub instalado, te saldrá error y habrá que seguir los pasos para instalar el certificado de Wifislax (habrá que crear un manual con capturas).
En caso de que arranque por UEFI pero sin SecureBoot, no notará nada, puesto que shim lanzará el grub sin problemas.
Voy a regenerar el del hdd y el Live y te lo dejo aquí.
PD: en la Live, hay que elegir un lugar fijo donde vamos a tener el certificado de Wifislax
Salu2
easy , todo lo que tiene que ver con efi/uefi secur boot.. en modo live estara en
/EFI/BOOT/
donde esta todo lo demas y donde ya esta ahora mismo el bootx64.efi
Ahora me asalta la duda , .. ¿en el modo live /EFI/BOOT donde tengo el bootx64.efi ... ese hay que firmarlo ? ..si es asi ..abra que modificar el make-grub.sh , para que si lo regeneramos , este firmado ,por que si me das uno y despues ejecuto el script, creo una regresion al "sin firmar"
creo que se me entiende.
Correcto. bootx64.efi es el shim. El grub se tiene que llamar grubx64.efi
No podemos hacer eso automatizado, puesto que firmas con la key de wifislax. Y si dejas eso por descuido en la Live, la hemos liado.
De hecho, me acabo de dar cuenta, que el efiboot.img usa el grub sin firmar. Habrá que ver que se hace con eso mas adelante (no sé si con añadir el grubx64 firmado es suficiente o tmbn hay que meter el shim con el MokManager).
Voy a dejarte el zip con toda la estructura (tanto hdd como Live) que habría que reemplazar para que todo rulase.
Salu2
-
Link del invento:
https://mega.nz/#!zAUHGSYA!6oLac_43oJ6SF41C2vgKkCPriiaDzjWC0EeLNhnJlt8 (https://mega.nz/#!zAUHGSYA!6oLac_43oJ6SF41C2vgKkCPriiaDzjWC0EeLNhnJlt8)
Salu2
-
pregunto ... por que no tengo claro el tema..
¿si ejecuto el script make-grub.sh ...que ?
me genera el fichero bootx64.efi en la carpeta del live ... ¿hay problema hay?
entiendo que hay 2 ficheros para el booteo efi
bootx64.efi y grubx64.efi
uno sera para secure boot y el otro no ..
¿que pasa con el script de marras? ...el que se usa para no secure boot, imagino da igual que no este firmmado ...
¿deberia el script generar el fichero como grubx64.efi en vez de boot ?
-
duda , en la carpeta del LIVE , has dejado uno de los ficheros con la extension "signed" .. ¿es correcto asi ?
MokManager.efi.signed
o debe ser
MokManager.efi
?¿
-
acabo de hacer una prueba rapida ..
he modificado en el grub.cfg y no efacte en nada..ya que lo que importa es el embedded , y que no cambie lo que pone en ese fichero , es decir que exista el fichero
WIFISLAXLIVE , y poco mas ;D
asi que voy a mover el script de marras fuera , a /opt/wifislax-scripts , para tenerlo por si hay que consultar algo ..
y los ficheros efi y demas se quedan como estaticos y ya esta ...una vez funcione , ya no hay por que generar ni tocar nada de esos ficheros.
confirmame , el tema del fichero mok.efi con la extension signed en la ruta del live ..que creo, debe acabar en .efi
-
Si, tiene que ser .efi en la Live
bootx64 es lo que se lanza por defecto, que es shim, un programa simplón pero que está firmado por Microsoft, y que lo único que hace es cargar grubx64.efi, binario de grub firmado por nosotros
Salu2
-
Si, tiene que ser .efi en la Live
bootx64 es lo que se lanza por defecto, que es shim, un programa simplón pero que está firmado por Microsoft, y que lo único que hace es cargar grubx64.efi, binario de grub firmado por nosotros
Salu2
ok ,entonces el fichero Mok...de la carpeta LIVE /EFI/BOOT/Mok ...
le quito el signed en el final del name y ya esta.
el script que habia lo he movido a otro sitio ,para no sobreescribir.
he ajustado tambien un poco el tema de las letras del menu que se hiban a la derecha ..y las de abajo ,las de ayuda tambien..y el help.
;D >:(
-
woow , algo que pidieron una vez,
al instalar al hdd , el menu grub ... una entradita para memtest ;D
en el modo live , tenemos las entradas tanto en modo bios como efi , pero la efi no funciona..voy a ver si la arreglo tambien.
-
passmark memtest86 efi ;D
mi carpeta actual , lleva la entrada efi para memtest cambiada y dentro de /EFI/BOOT la carpeta memtest con el passmark 7.1 free ;D
mola , es como las bios uefi , todo grafico y puedes con raton configurar y mirar cosas .. >:(
http://www.mediafire.com/download/44aj4f4jb9724d5/EFI.zip
** lo de meter memtest en iso , al final no , por que si el sistema es efi , necesita unas cosas y si es bios otras ..asi que paso de complicarlo , si alguien quiere un memtest ,desde el pincho usb o cd.
-
si puedes prueba si tira con un sistema n secure boot ... aunque si no funciona, pues al menos medio , es mejor que nada.
a mi me tira bien ,pero el portatil solo tiene efi ...sin secure boot.
-
passmark memtest86 efi ;D
mi carpeta actual , lleva la entrada efi para memtest cambiada y dentro de /EFI/BOOT la carpeta memtest con el passmark 7.1 free ;D
mola , es como las bios uefi , todo grafico y puedes con raton configurar y mirar cosas .. >:(
http://www.mediafire.com/download/44aj4f4jb9724d5/EFI.zip
** lo de meter memtest en iso , al final no , por que si el sistema es efi , necesita unas cosas y si es bios otras ..asi que paso de complicarlo , si alguien quiere un memtest ,desde el pincho usb o cd.
Entonces, pruebo eso o al final no lo vas a meter?
Salu2
-
passmark memtest86 efi ;D
mi carpeta actual , lleva la entrada efi para memtest cambiada y dentro de /EFI/BOOT la carpeta memtest con el passmark 7.1 free ;D
mola , es como las bios uefi , todo grafico y puedes con raton configurar y mirar cosas .. >:(
http://www.mediafire.com/download/44aj4f4jb9724d5/EFI.zip
** lo de meter memtest en iso , al final no , por que si el sistema es efi , necesita unas cosas y si es bios otras ..asi que paso de complicarlo , si alguien quiere un memtest ,desde el pincho usb o cd.
Entonces, pruebo eso o al final no lo vas a meter?
Salu2
he probado en 3 maquinas uefi y funciona bien , mi duda es con una maquina que lleve secure boot , que no tengo para probar , pero vamos, se que funciona.
-
Si, funciona. Además, está firmado por Microsoft el binario:
vk496@vk496-C16B:/media/vk496/B9BB-E87F/EFI/BOOT/memtest$ sbverify --cert ~/Descargas/KERNEL/refind-bin-0.10.3/keys/microsoft-uefica-public.crt memtestx64.efi
Signature verification OK
Lo único, que no me funciona el ratón (touchpad).
Salu2
-
que raro , a mi el raton y touchpad me ha funcionado en todos.
-
Acabo de probar la nueva iso que subiste a mediafire del día 20, me vuelve a salir error en la instalación del grub. Aparece un error ocurrió y entre paréntesis (update-grub). Lo he lanzado mediante terminal y esto es lo que me aparece.
wifislax ~ # /opt/install/Grub2InstallerGUI
modo UEFI
mmcblk0
chroot /mnt/mmcblk0p6 grub-install --recheck --efi-directory=/tmp/tmp.cNM7a1 --force mmcblk0
Installing for x86_64-efi platform.
Instalación terminada. No se notificó ningún error.
Generating grub configuration file ...
Encontrado tema: /boot/grub/themes/Wifislax/theme.txt
Encontrada imagen de linux: /boot/vmlinuz-4.4.21-x86_64-wifislax
wifislax ~ #
Por cierto teniendo activado el secure boot arranca el pendrive >:(
Mis felicitaciones por lo conseguido y siento tener que escribir por un error de nuevo del grub.
-
--efi-directory=/tmp/tmp.cNM7a1
hay esta el asunto , ..
no se .pero creo que vendria bien ..saber como queda exactamente el disco ,depues de crear las particiones.
ejecuta
parted -l |grep mmcblk
-
Acabo de probar la nueva iso que subiste a mediafire del día 20, me vuelve a salir error en la instalación del grub. Aparece un error ocurrió y entre paréntesis (update-grub). Lo he lanzado mediante terminal y esto es lo que me aparece.
wifislax ~ # /opt/install/Grub2InstallerGUI
modo UEFI
mmcblk0
chroot /mnt/mmcblk0p6 grub-install --recheck --efi-directory=/tmp/tmp.cNM7a1 --force mmcblk0
Installing for x86_64-efi platform.
Instalación terminada. No se notificó ningún error.
Generating grub configuration file ...
Encontrado tema: /boot/grub/themes/Wifislax/theme.txt
Encontrada imagen de linux: /boot/vmlinuz-4.4.21-x86_64-wifislax
wifislax ~ #
Por cierto teniendo activado el secure boot arranca el pendrive >:(
Mis felicitaciones por lo conseguido y siento tener que escribir por un error de nuevo del grub.
El mensaje de la consola no es el correcto. El code estaba mal. Aun así, hay que investigar por qué motivo te da un error de salida anormal.
Estos días haré la prueba instalando Wifislax en una tarjeta SD que tengo por ahí. Tardaré bastante tiempo porque ando liado
Salu2
-
yo tambien tengo en casa un portatil con sd card, pero siempre se me instalo bien wifislax...asi que no se si sera detectada con sdX
en realidad es una minisd en un adaptador ..probare a ver.
EDIT: mmm no es verdad , ahora recuerdo ,la sd , la usaba para cargar el livecd y de alli instalar al hdd, nunca probe a instalar en la sd , (micro sd en adaptador) ;)
-
wifislax ~ # parted -l |grep mmcblk
Error: /dev/mmcblk0rpmb: unrecognised disk label
Aviso: Error fsyncing/closing /dev/mmcblk0rpmb: Error de entrada/salida
La cosa es que estas tablet chinas al final salen caras jajaj Son mas raras que comer con las manos y los drivers ya ni os cuento, porque ni linux reconoce el tactil o la wifi pero eso es otra historia. Yo lo que me digais lo voy probando en cuento tengo tiempo.
-
woow , ..
/dev/mmcblk0rpmb
mm ,raro ..solo aparece un resultado ...deberias tener 2
el de la particion EFI y el de la particion EXT4
pondre un video .. no se si te estas saltando algun paso.
a ver si te esta pasando como a mi al principio .. la particion EFI primero , y despues la EXT4 , si no fallara.
-
wifislax ~ # /dev/mmcblk0rpmb
bash: /dev/mmcblk0rpmb: Permiso denegado
wifislax ~ #
La particion esta creada para windows la EFI, sino no podría utilizar windows. Por eso hago solo la de ext4 y listo. No se si se pueden hacer mas de una entrada EFI o crearia conflicto con las entradas. Si se que no puede entrar a las particiones de windows desde wifislax me da error y no tengo ni idea a lo que se debe. Tal vez por eso pone que el permiso esta denegado.
Saludos
-
permiso denegado te va a dar siempre , si tratas de entrar desde la consola.
¿cuando estas en modo live e intentas montar la particion de windows en dolphin te da error?
-
permiso denegado te va a dar siempre , si tratas de entrar desde la consola.
¿cuando estas en modo live e intentas montar la particion de windows en dolphin te da error?
Siempre, desde que puedo arrancar en UEFI no he podido entrar a ninguna particion de windows. Siempre tenia cosas descargadas y no habia forma de poder entrar y con el gparted no me da la opcion de montarlas, que no se a que se debe. Solo podia entrar a la particion que yo hacia en ext4.
-
Intenta montar con dolphin la particion, y cuando te de error, peganos la salida de
dmesg
Creo que tu tarjeta SD está corrompida
PD: Partición EFI siempre hay una.
Salu2
-
he probado en 3 maquinas uefi y funciona bien , mi duda es con una maquina que lleve secure boot , que no tengo para probar , pero vamos, se que funciona.
con la versión wifislax64-20092016.iso + la carpeta EFI de este enlace "http://www.mediafire.com/download/44aj4f4jb9724d5/EFI.zip" arranco sin ningún problema ni warnings, en modo UEFI+Secure Boot activado.
Una vez arrancado puedo entrar a los discos de Windows usando Dolphin, sin tener que montar particiones ni nada.
El TouchPad también me funciona.
saludos
Edito: El mentest gráfico también me funciona y las pruebas han sido en modo LiveUSB
-
Intenta montar con dolphin la particion, y cuando te de error, peganos la salida de
dmesg
Creo que tu tarjeta SD está corrompida
PD: Partición EFI siempre hay una.
Salu2
[ 0.441776] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.446603] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.446618] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.446630] vgaarb: loaded
[ 0.446638] vgaarb: bridge control possible 0000:00:02.0
[ 0.446972] SCSI subsystem initialized
[ 0.447099] libata version 3.00 loaded.
[ 0.447117] ACPI: bus type USB registered
[ 0.447179] usbcore: registered new interface driver usbfs
[ 0.447213] usbcore: registered new interface driver hub
[ 0.447265] usbcore: registered new device driver usb
[ 0.447774] PCI: Using ACPI for IRQ routing
[ 0.450552] PCI: pci_cache_line_size set to 64 bytes
[ 0.450610] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.450625] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.450628] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.450631] e820: reserve RAM buffer [mem 0xbb100000-0xbbffffff]
[ 0.450635] e820: reserve RAM buffer [mem 0xbba76000-0xbbffffff]
[ 0.450637] e820: reserve RAM buffer [mem 0xbba7a000-0xbbffffff]
[ 0.451185] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.451202] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.453243] amd_nb: Cannot enumerate AMD northbridges
[ 0.453283] clocksource: Switched to clocksource hpet
[ 0.475629] pnp: PnP ACPI init
[ 0.476003] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.476016] system 00:00: [io 0x0400-0x047f] has been reserved
[ 0.476027] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 0.476042] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.476242] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.483217] system 00:02: [mem 0xd1839000-0xd1839fff] has been reserved
[ 0.483234] system 00:02: [mem 0xd1837000-0xd1837fff] has been reserved
[ 0.483245] system 00:02: [mem 0xd1835000-0xd1835fff] has been reserved
[ 0.483256] system 00:02: [mem 0xd1824000-0xd1824fff] has been reserved
[ 0.483266] system 00:02: [mem 0xd1822000-0xd1822fff] has been reserved
[ 0.483277] system 00:02: [mem 0xd1820000-0xd1820fff] has been reserved
[ 0.483306] system 00:02: [mem 0xd181e000-0xd181efff] has been reserved
[ 0.483317] system 00:02: [mem 0xd181c000-0xd181cfff] has been reserved
[ 0.483327] system 00:02: [mem 0xd181a000-0xd181afff] has been reserved
[ 0.483339] system 00:02: [mem 0xd1818000-0xd1818fff] has been reserved
[ 0.483350] system 00:02: [mem 0xd1833000-0xd1833fff] has been reserved
[ 0.483361] system 00:02: [mem 0xd1831000-0xd1831fff] has been reserved
[ 0.483371] system 00:02: [mem 0xd182f000-0xd182ffff] has been reserved
[ 0.483382] system 00:02: [mem 0xd182d000-0xd182dfff] has been reserved
[ 0.483393] system 00:02: [mem 0xd182b000-0xd182bfff] has been reserved
[ 0.483403] system 00:02: [mem 0xd1829000-0xd1829fff] has been reserved
[ 0.483414] system 00:02: [mem 0xd1827000-0xd1827fff] has been reserved
[ 0.483425] system 00:02: [mem 0xd1825000-0xd1825fff] has been reserved
[ 0.483442] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.483620] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.483633] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.483644] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.483655] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.483666] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.483676] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[ 0.483687] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
[ 0.483698] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.483709] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.483723] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.484148] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.485821] pnp: PnP ACPI: found 5 devices
[ 0.496450] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.496490] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.496497] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.496503] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.496507] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.496511] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.496515] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.496519] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.496523] pci_bus 0000:00: resource 11 [mem 0x20000000-0x201fffff window]
[ 0.496527] pci_bus 0000:00: resource 12 [mem 0xbcd00001-0xbed00000 window]
[ 0.496532] pci_bus 0000:00: resource 13 [mem 0xc0000000-0xdfffffff window]
[ 0.496605] NET: Registered protocol family 2
[ 0.497011] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.497149] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.497396] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.497475] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.497529] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.497711] NET: Registered protocol family 1
[ 0.497952] RPC: Registered named UNIX socket transport module.
[ 0.497969] RPC: Registered udp transport module.
[ 0.497978] RPC: Registered tcp transport module.
[ 0.497986] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.498041] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.498497] PCI: CLS 64 bytes, default 64
[ 0.498642] Trying to unpack rootfs image as initramfs...
[ 1.829085] Freeing initrd memory: 4784K (ffff880037698000 - ffff880037b44000)
[ 1.829117] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.829131] software IO TLB [mem 0xb6000000-0xba000000] (64MB) mapped at [ffff8800b6000000-ffff8800b9ffffff]
[ 1.832586] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.832676] audit: initializing netlink subsys (disabled)
[ 1.832720] audit: type=2000 audit(1474552647.813:1): initialized
[ 1.833120] Initialise system trusted keyring
[ 1.838106] VFS: Disk quotas dquot_6.6.0
[ 1.838207] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.839135] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.839676] NFS: Registering the id_resolver key type
[ 1.839712] Key type id_resolver registered
[ 1.839722] Key type id_legacy registered
[ 1.839740] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.840198] ntfs: driver 2.1.32 [Flags: R/W].
[ 1.840379] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.840590] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1.843424] SGI XFS with ACLs, security attributes, no debug enabled
[ 1.844651] ocfs2: Registered cluster interface o2cb
[ 1.844800] OCFS2 User DLM kernel interface loaded
[ 1.850774] async_tx: api initialized (async)
[ 1.850908] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.851012] io scheduler noop registered
[ 1.851024] io scheduler deadline registered
[ 1.851057] io scheduler cfq registered (default)
[ 1.851366] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.851393] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.851455] efifb: probing for efifb
[ 1.851491] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 1920k, total 1920k
[ 1.851507] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 1.851514] efifb: scrolling: redraw
[ 1.851523] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.856044] Console: switching to colour frame buffer device 100x37
[ 1.859995] fb0: EFI VGA frame buffer device
[ 1.860061] intel_idle: MWAIT substates: 0x33000020
[ 1.860064] intel_idle: v0.4.1 model 0x4C
[ 1.860067] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.860638] GHES: HEST is not enabled!
[ 1.865540] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.886102] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.891169] Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
[ 1.899009] brd: module loaded
[ 1.906326] loop: module loaded
[ 1.908138] HP CISS Driver (v 3.6.26)
[ 1.912224] fnic: Cisco FCoE HBA Driver, ver 1.6.0.17a
[ 1.914087] fnic: Successfully Initialized Trace Buffer
[ 1.916009] fnic: Successfully Initialized FC_CTLR Trace Buffer
[ 1.919084] Adaptec aacraid driver 1.2-1[41010]-ms
[ 1.920901] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 1.922924] scsi: <fdomain> Detection failed (no card)
[ 1.924796] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k.
[ 1.926700] Emulex LightPulse Fibre Channel SCSI driver 11.0.0.0.
[ 1.928561] Copyright(c) 2004-2015 Emulex. All rights reserved.
[ 1.931174] Brocade BFA FC/FCOE SCSI driver - version: 3.2.23.0
[ 1.933261] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 1.935979] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 1.937965] megasas: 06.808.16.00-rc1
[ 1.939905] mpt3sas version 09.102.00.00 loaded
[ 1.943333] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 1.945379] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 1.947362] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 1.949345] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 1.951345] ipr: IBM Power RAID SCSI Device Driver version: 2.6.3 (October 17, 2015)
[ 1.953343] RocketRAID 3xxx/4xxx Controller driver v1.10.0
[ 1.955322] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 1.957472] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 1.962104] PDC20230-C/20630 VLB ATA controller detected.
[ 1.966236] scsi host0: pata_legacy
[ 1.968390] ata1: PATA max PIO2 cmd 0x1f0 ctl 0x3f6 irq 14
[ 2.830861] tsc: Refined TSC clocksource calibration: 1439.953 MHz
[ 2.833004] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x14c18e756e4, max_idle_ns: 440795259570 ns
[ 3.836300] clocksource: Switched to clocksource tsc
[ 4.908063] floppy0: no floppy controllers found
[ 4.912007] scsi host1: pata_legacy
[ 4.914099] ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 5.067818] Fusion MPT base driver 3.04.20
[ 5.069833] Copyright (c) 1999-2008 LSI Corporation
[ 5.071848] Fusion MPT SPI Host driver 3.04.20
[ 5.073921] Fusion MPT FC Host driver 3.04.20
[ 5.075956] Fusion MPT SAS Host driver 3.04.20
[ 5.077949] Fusion MPT misc device (ioctl) driver 3.04.20
[ 5.080210] mptctl: Registered with Fusion MPT base driver
[ 5.082124] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 5.083992] Fusion MPT LAN driver 3.04.20
[ 5.086089] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.087972] ehci-pci: EHCI PCI platform driver
[ 5.089846] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.091700] ohci-pci: OHCI PCI platform driver
[ 5.093547] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.095773] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.097859] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 5.100904] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 5.102787] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 5.103001] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.104852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.106671] usb usb1: Product: xHCI Host Controller
[ 5.108447] usb usb1: Manufacturer: Linux 4.4.21-x86_64-wifislax xhci-hcd
[ 5.110242] usb usb1: SerialNumber: 0000:00:14.0
[ 5.112451] hub 1-0:1.0: USB hub found
[ 5.114219] hub 1-0:1.0: 7 ports detected
[ 5.117797] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.119716] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 5.121685] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 5.123391] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.125046] usb usb2: Product: xHCI Host Controller
[ 5.126687] usb usb2: Manufacturer: Linux 4.4.21-x86_64-wifislax xhci-hcd
[ 5.128370] usb usb2: SerialNumber: 0000:00:14.0
[ 5.130455] hub 2-0:1.0: USB hub found
[ 5.132123] hub 2-0:1.0: 6 ports detected
[ 5.135493] usbcore: registered new interface driver usb-storage
[ 5.137232] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 5.674657] i8042: Can't read CTR while initializing i8042
[ 5.676784] i8042: probe of i8042 failed with error -5
[ 5.678933] mousedev: PS/2 mouse device common for all mice
[ 5.681123] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 5.682939] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 5.684737] md: linear personality registered for level -1
[ 5.686503] md: raid0 personality registered for level 0
[ 5.688253] md: raid1 personality registered for level 1
[ 5.689955] md: raid10 personality registered for level 10
[ 5.692262] md: raid6 personality registered for level 6
[ 5.693978] md: raid5 personality registered for level 5
[ 5.695605] md: raid4 personality registered for level 4
[ 5.697192] md: multipath personality registered for level -4
[ 5.698883] device-mapper: uevent: version 1.0.3
[ 5.701070] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 5.703103] Intel P-state driver initializing.
[ 5.705890] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.711230] usbcore: registered new interface driver usbhid
[ 5.715964] usbhid: USB HID core driver
[ 5.718556] input: Speakup as /devices/virtual/input/input0
[ 5.721739] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[ 5.725386] speakup 3.1.6: initialized
[ 5.730258] synth name on entry is: (null)
[ 5.739045] Initializing XFRM netlink socket
[ 5.741472] NET: Registered protocol family 17
[ 5.743904] 9pnet: Installing 9P2000 support
[ 5.746296] Key type dns_resolver registered
[ 5.749235] microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x359
[ 5.750791] microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x359
[ 5.752911] microcode: CPU2 sig=0x406c3, pf=0x1, revision=0x359
[ 5.754473] microcode: CPU3 sig=0x406c3, pf=0x1, revision=0x359
[ 5.755982] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.757535] SSE version of gcm_enc/dec engaged.
[ 5.761882] registered taskstats version 1
[ 5.763052] Loading compiled-in X.509 certificates
[ 5.765287] Btrfs loaded
[ 5.782326] Key type encrypted registered
[ 5.786729] Freeing unused kernel memory: 1396K (ffffffff8256c000 - ffffffff826c9000)
[ 5.787918] Write protecting the kernel read-only data: 20480k
[ 5.790534] Freeing unused kernel memory: 1212K (ffff880002cd1000 - ffff880002e00000)
[ 5.799104] Freeing unused kernel memory: 1336K (ffff8800032b2000 - ffff880003400000)
[ 5.841792] random: udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[ 5.841932] random: udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[ 5.841969] random: udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[ 5.842012] random: udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[ 5.842074] random: udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[ 5.842164] random: udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[ 5.899607] udevd[243]: starting eudev-3.1.5
[ 5.902588] random: udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[ 5.902647] random: udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[ 5.902724] random: udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[ 5.902846] random: udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[ 5.929353] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 6.106360] usb 1-2: New USB device found, idVendor=0930, idProduct=6545
[ 6.106379] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.106390] usb 1-2: Product: DataTraveler 2.0
[ 6.106402] usb 1-2: Manufacturer: Kingston
[ 6.106412] usb 1-2: SerialNumber: 08606E6D4080ED80971344FC
[ 6.109028] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 6.111101] scsi host2: usb-storage 1-2:1.0
[ 6.265921] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 6.438982] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608
[ 6.438994] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.438999] usb 1-3: Product: USB2.0 Hub
[ 6.441754] hub 1-3:1.0: USB hub found
[ 6.443220] hub 1-3:1.0: 4 ports detected
[ 6.601828] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[ 6.792975] usb 1-4: New USB device found, idVendor=148f, idProduct=3070
[ 6.792994] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.793007] usb 1-4: Product: 802.11 n WLAN
[ 6.793017] usb 1-4: Manufacturer: Ralink
[ 6.793026] usb 1-4: SerialNumber: 1.0
[ 6.838838] usb 1-3.1: new low-speed USB device number 5 using xhci_hcd
[ 6.931010] usb 1-3.1: New USB device found, idVendor=0c45, idProduct=8506
[ 6.931029] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.931041] usb 1-3.1: Product: USB Keyboard
[ 6.931052] usb 1-3.1: Manufacturer: SONiX
[ 6.931855] usb 1-3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 6.931869] usb 1-3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 6.937136] input: SONiX USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:0C45:8506.0001/input/input1
[ 6.989341] hid-generic 0003:0C45:8506.0001: input,hidraw0: USB HID v1.11 Keyboard [SONiX USB Keyboard] on usb-0000:00:14.0-3.1/input0
[ 6.998023] input: SONiX USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:0C45:8506.0002/input/input2
[ 7.051007] hid-generic 0003:0C45:8506.0002: input,hidraw1: USB HID v1.11 Mouse [SONiX USB Keyboard] on usb-0000:00:14.0-3.1/input1
[ 7.117326] usb 1-3.4: new full-speed USB device number 6 using xhci_hcd
[ 7.118933] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[ 7.121289] sd 2:0:0:0: [sda] 30490624 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 7.122843] sd 2:0:0:0: [sda] Write Protect is off
[ 7.122852] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 7.124680] sd 2:0:0:0: [sda] No Caching mode page found
[ 7.124687] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 7.133338] sda: sda1
[ 7.138625] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 7.204319] usb 1-3.4: New USB device found, idVendor=046d, idProduct=c52f
[ 7.204328] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.204333] usb 1-3.4: Product: USB Receiver
[ 7.204337] usb 1-3.4: Manufacturer: Logitech
[ 7.208609] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.0/0003:046D:C52F.0003/input/input3
[ 7.209898] hid-generic 0003:046D:C52F.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3.4/input0
[ 7.213696] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.1/0003:046D:C52F.0004/input/input4
[ 7.265650] hid-generic 0003:046D:C52F.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.4/input1
[ 11.607714] random: nonblocking pool is initialized
[ 11.703929] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 17.869808] udevd[1118]: starting eudev-3.1.5
[ 18.032474] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 18.032571] ACPI: AC Adapter [ADP1] (on-line)
[ 18.032688] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 18.032697] ACPI: Power Button [PWRB]
[ 18.032816] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 18.032996] ACPI: Lid Switch [LID0]
[ 18.033116] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 18.033123] ACPI: Power Button [PWRF]
[ 18.136087] 8086228A:00: ttyS1 at MMIO 0xd1821000 (irq = 39, base_baud = 2764800) is a 16550A
[ 18.136420] 8086228A:01: ttyS2 at MMIO 0xd181f000 (irq = 40, base_baud = 2764800) is a 16550A
[ 18.243198] sdhci: Secure Digital Host Controller Interface driver
[ 18.243202] sdhci: Copyright(c) Pierre Ossman
[ 18.254547] sdhci-acpi 80860F14:00: No vmmc regulator found
[ 18.254553] sdhci-acpi 80860F14:00: No vqmmc regulator found
[ 18.273626] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 18.294913] Bluetooth: Core ver 2.21
[ 18.294950] NET: Registered protocol family 31
[ 18.294953] Bluetooth: HCI device and connection manager initialized
[ 18.294960] Bluetooth: HCI socket layer initialized
[ 18.294965] Bluetooth: L2CAP socket layer initialized
[ 18.294977] Bluetooth: SCO socket layer initialized
[ 18.298496] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 18.307911] i2c_hid i2c-CHPN0001:00: hid_descr_cmd failed
[ 18.322479] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 18.323047] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 18.345310] sdhci-acpi 80860F14:02: No vmmc regulator found
[ 18.345315] sdhci-acpi 80860F14:02: No vqmmc regulator found
[ 18.358751] Bluetooth: HCI UART driver ver 2.3
[ 18.358756] Bluetooth: HCI UART protocol H4 registered
[ 18.358758] Bluetooth: HCI UART protocol BCSP registered
[ 18.358760] Bluetooth: HCI UART protocol LL registered
[ 18.358762] Bluetooth: HCI UART protocol ATH3K registered
[ 18.358764] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 18.358853] Bluetooth: HCI UART protocol Intel registered
[ 18.358900] Bluetooth: HCI UART protocol BCM registered
[ 18.358902] Bluetooth: HCI UART protocol QCA registered
[ 18.361164] mmc1: SDHCI controller on ACPI [80860F14:02] using ADMA
[ 18.403239] thermal LNXTHERM:00: registered as thermal_zone2
[ 18.403245] ACPI: Thermal Zone [TZ00] (0 C)
[ 18.427302] mmc0: MAN_BKOPS_EN bit is not set
[ 18.456561] proc_thermal 0000:00:0b.0: enabling device (0000 -> 0002)
[ 18.463188] mmc0: new HS200 MMC card at address 0001
[ 18.518886] EFI Variables Facility v0.08 2004-May-17
[ 18.603336] Linux agpgart interface v0.103
[ 18.668444] [drm] Initialized drm 1.1.0 20060810
[ 18.719470] intel_rapl: Found RAPL domain package
[ 18.719475] intel_rapl: Found RAPL domain core
[ 18.944698] [drm] Memory usable by graphics device = 2048M
[ 18.944706] checking generic (c0000000 1e0000) vs hw (c0000000 10000000)
[ 18.944708] fb: switching to inteldrmfb from EFI VGA
[ 18.944775] Console: switching to colour dummy device 80x25
[ 18.944897] [drm] Replacing VGA console driver
[ 18.945133] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 18.945136] [drm] Driver supports precise vblank timestamp query.
[ 18.945229] [drm:intel_parse_bios [i915]] *ERROR* Unable to parse MIPI Sequence Block v3+
[ 19.047295] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 19.048260] [drm:pwm_setup_backlight [i915]] *ERROR* Failed to own the pwm chip
[ 19.057473] usbcore: registered new interface driver uas
[ 19.060282] ------------[ cut here ]------------
[ 19.060367] WARNING: CPU: 1 PID: 1128 at drivers/gpu/drm/i915/intel_display.c:690 chv_calc_dpll_params+0x9c/0xc0 [i915]()
[ 19.060370] WARN_ON(clock->n == 0 || clock->p == 0)
[ 19.060372] Modules linked in:
[ 19.060374] uas i915(+) coretemp hwmon intel_rapl drm_kms_helper intel_powerclamp kvm_intel drm bmc150_accel_i2c bmc150_accel_core kvm intel_gtt agpgart i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt irqbypass crct10dif_pclmul crc32_pclmul efi_pstore crc32c_intel industrialio_triggered_buffer efivars mei_txe kfifo_buf lpc_ich processor_thermal_device mei intel_soc_dts_iosf industrialio thermal regmap_i2c battery hci_uart btbcm btqca 8250_fintek btintel fjes bluetooth dw_dmac dw_dmac_core video sdhci_acpi sdhci rfkill_gpio rfkill iosf_mbi i2c_designware_platform i2c_designware_core tpm_crb tpm_tis mmc_core 8250_dw soc_button_array tpm int3400_thermal int3403_thermal acpi_thermal_rel int340x_thermal_zone pinctrl_cherryview button ac processor acpi_pad
[ 19.060455] CPU: 1 PID: 1128 Comm: udevd Tainted: G W 4.4.21-x86_64-wifislax #1
[ 19.060458] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Cherry Trail CR, BIOS C106_B101UAN.608 01/26/2016
[ 19.060460] 0000000000000000 ffff88013fabf6e8 ffffffff81618c08 ffff88013fabf730
[ 19.060466] ffffffffc09620d0 ffff88013fabf720 ffffffff8108d7b2 ffff8800b02d7000
[ 19.060471] 0000000000000000 ffff8800afc00000 0000000000000000 0000000000000001
[ 19.060476] Call Trace:
[ 19.060486] [<ffffffff81618c08>] dump_stack+0x4d/0x65
[ 19.060493] [<ffffffff8108d7b2>] warn_slowpath_common+0x82/0xc0
[ 19.060497] [<ffffffff8108d83c>] warn_slowpath_fmt+0x4c/0x50
[ 19.060559] [<ffffffffc08f8a4c>] chv_calc_dpll_params+0x9c/0xc0 [i915]
[ 19.060621] [<ffffffffc08f9272>] i9xx_get_pipe_config+0x632/0x670 [i915]
[ 19.060684] [<ffffffffc090689b>] intel_modeset_setup_hw_state+0xab/0xdc0 [i915]
[ 19.060716] [<ffffffffc06e2a90>] ? drm_modeset_lock_all_crtcs+0x90/0xa0 [drm]
[ 19.060778] [<ffffffffc090912b>] intel_modeset_init+0xa6b/0x1a60 [i915]
[ 19.060842] [<ffffffffc09416e1>] i915_driver_load+0xcb1/0x1620 [i915]
[ 19.060848] [<ffffffff81c0e2c7>] ? netlink_broadcast_filtered+0x137/0x3c0
[ 19.060853] [<ffffffff8161bc40>] ? cleanup_uevent_env+0x10/0x10
[ 19.060857] [<ffffffff8161bf6e>] ? kobject_uevent_env+0xfe/0x500
[ 19.060863] [<ffffffff8172a737>] ? get_device+0x17/0x20
[ 19.060867] [<ffffffff8172fd35>] ? klist_class_dev_get+0x15/0x20
[ 19.060872] [<ffffffff81cbeaf7>] ? klist_node_init+0x37/0x50
[ 19.060875] [<ffffffff81cbec70>] ? klist_add_tail+0x20/0x50
[ 19.060879] [<ffffffff8172bf79>] ? device_add+0x169/0x5c0
[ 19.060903] [<ffffffffc06cd0e7>] drm_dev_register+0xa7/0xb0 [drm]
[ 19.060926] [<ffffffffc06cf57d>] drm_get_pci_dev+0x8d/0x1e0 [drm]
[ 19.060981] [<ffffffffc08881e4>] i915_pci_probe+0x34/0x50 [i915]
[ 19.060986] [<ffffffff8166026a>] pci_device_probe+0x8a/0xf0
[ 19.060991] [<ffffffff8172f057>] driver_probe_device+0x1f7/0x310
[ 19.060994] [<ffffffff8172f1f4>] __driver_attach+0x84/0x90
[ 19.060998] [<ffffffff8172f170>] ? driver_probe_device+0x310/0x310
[ 19.061001] [<ffffffff8172d104>] bus_for_each_dev+0x64/0xa0
[ 19.061005] [<ffffffff8172e91e>] driver_attach+0x1e/0x20
[ 19.061008] [<ffffffff8172e551>] bus_add_driver+0x1b1/0x220
[ 19.061012] [<ffffffff8172fa80>] driver_register+0x60/0xe0
[ 19.061016] [<ffffffff8165e8ec>] __pci_register_driver+0x4c/0x50
[ 19.061039] [<ffffffffc06cf7b0>] drm_pci_init+0xe0/0x110 [drm]
[ 19.061042] [<ffffffffc09a8000>] ? 0xffffffffc09a8000
[ 19.061094] [<ffffffffc09a8092>] i915_init+0x92/0x99 [i915]
[ 19.061100] [<ffffffff810003c9>] do_one_initcall+0x99/0x1e0
[ 19.061105] [<ffffffff8119f091>] ? __vunmap+0x91/0xe0
[ 19.061109] [<ffffffff811aba1b>] ? kmem_cache_alloc_trace+0x18b/0x1f0
[ 19.061112] [<ffffffff811ac2c3>] ? kfree+0x143/0x160
[ 19.061118] [<ffffffff81162ede>] do_init_module+0x5f/0x1c3
[ 19.061122] [<ffffffff81107e35>] load_module+0x1c95/0x2270
[ 19.061126] [<ffffffff81104c60>] ? __symbol_put+0x50/0x50
[ 19.061131] [<ffffffff811c7251>] ? kernel_read+0x41/0x60
[ 19.061136] [<ffffffff811085cf>] SYSC_finit_module+0x8f/0xa0
[ 19.061140] [<ffffffff811085fe>] SyS_finit_module+0xe/0x10
[ 19.061145] [<ffffffff81cc9c5b>] entry_SYSCALL_64_fastpath+0x16/0x6a
[ 19.061148] ---[ end trace 1bbcbee32b666bcc ]---
[ 19.149290] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 19.154468] acpi device:01: registered as cooling_device6
[ 19.155290] acpi device:02: registered as cooling_device7
[ 19.156122] acpi device:03: registered as cooling_device8
[ 19.160120] acpi device:04: registered as cooling_device9
[ 19.163148] acpi device:05: registered as cooling_device10
[ 19.163949] acpi device:06: registered as cooling_device11
[ 19.164768] acpi device:07: registered as cooling_device12
[ 19.165550] acpi device:08: registered as cooling_device13
[ 19.165706] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 19.166399] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 19.257295] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 19.308173] mmcblk0: mmc0:0001 HCG8e 58.3 GiB
[ 19.308369] mmcblk0boot0: mmc0:0001 HCG8e partition 1 4.00 MiB
[ 19.308537] mmcblk0boot1: mmc0:0001 HCG8e partition 2 4.00 MiB
[ 19.308701] mmcblk0rpmb: mmc0:0001 HCG8e partition 3 4.00 MiB
[ 19.313560] i2c /dev entries driver
[ 19.326904] mmcblk0: p1 p2 p3 p4 p5 p6
[ 19.402252] fbcon: inteldrmfb (fb0) is primary device
[ 19.569289] mmc1: Problem switching card into high-speed mode!
[ 19.572499] mmc1: new SDXC card at address 21db
[ 19.573553] mmcblk1: mmc1:21db APPSD 62.5 GiB
[ 19.574630] mmcblk1: p1
[ 19.894565] cfg80211: World regulatory domain updated:
[ 19.894570] cfg80211: DFS Master region: unset
[ 19.894570] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.894575] cfg80211: (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.894578] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 94000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 19.894580] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.894583] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 19.894586] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 19.894588] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 19.894590] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.894593] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 20.020574] usb 1-4: reset high-speed USB device number 4 using xhci_hcd
[ 20.200470] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 20.216006] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 20.216497] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 20.217176] usbcore: registered new interface driver rt2800usb
[ 20.291969] ------------[ cut here ]------------
[ 20.292061] WARNING: CPU: 2 PID: 6 at drivers/gpu/drm/i915/intel_sideband.c:200 vlv_dpio_read+0x68/0x80 [i915]()
[ 20.292063] DPIO read pipe A reg 0x8134 == 0xffffffff
[ 20.292128] Modules linked in: rt2800usb rt2x00usb rt2800lib rt2x00lib mac80211 cfg80211 crc_ccitt i2c_dev mmc_block evdev joydev uas i915 coretemp hwmon intel_rapl drm_kms_helper intel_powerclamp kvm_intel drm bmc150_accel_i2c bmc150_accel_core kvm intel_gtt agpgart i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt irqbypass crct10dif_pclmul crc32_pclmul efi_pstore crc32c_intel industrialio_triggered_buffer efivars mei_txe kfifo_buf lpc_ich processor_thermal_device mei intel_soc_dts_iosf industrialio thermal regmap_i2c battery hci_uart btbcm btqca 8250_fintek btintel fjes bluetooth dw_dmac dw_dmac_core video sdhci_acpi sdhci rfkill_gpio rfkill iosf_mbi i2c_designware_platform i2c_designware_core tpm_crb tpm_tis mmc_core 8250_dw soc_button_array tpm int3400_thermal int3403_thermal acpi_thermal_rel
[ 20.292133] int340x_thermal_zone pinctrl_cherryview button ac processor acpi_pad
[ 20.292138] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G W 4.4.21-x86_64-wifislax #1
[ 20.292140] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Cherry Trail CR, BIOS C106_B101UAN.608 01/26/2016
[ 20.292149] Workqueue: events_unbound async_run_entry_fn
[ 20.292154] 0000000000000000 ffff880139a3b818 ffffffff81618c08 ffff880139a3b860
[ 20.292158] ffffffffc09668a0 ffff880139a3b850 ffffffff8108d7b2 0000000000000000
[ 20.292161] 0000000000008134 ffff8800afc00000 0000000000008004 0000000000000001
[ 20.292162] Call Trace:
[ 20.292171] [<ffffffff81618c08>] dump_stack+0x4d/0x65
[ 20.292177] [<ffffffff8108d7b2>] warn_slowpath_common+0x82/0xc0
[ 20.292180] [<ffffffff8108d83c>] warn_slowpath_fmt+0x4c/0x50
[ 20.292248] [<ffffffffc0912428>] vlv_dpio_read+0x68/0x80 [i915]
[ 20.292317] [<ffffffffc08f91b7>] i9xx_get_pipe_config+0x577/0x670 [i915]
[ 20.292349] [<ffffffffc06d61cc>] ? drm_property_free_blob+0x8c/0xb0 [drm]
[ 20.292376] [<ffffffffc06d627e>] ? drm_property_unreference_blob+0x8e/0xc0 [drm]
[ 20.292445] [<ffffffffc090082a>] intel_atomic_commit+0x7aa/0x13c0 [i915]
[ 20.292474] [<ffffffffc06e3e1e>] ? drm_atomic_check_only+0x18e/0x590 [drm]
[ 20.292504] [<ffffffffc06e3bc7>] ? drm_atomic_add_affected_connectors+0x27/0xf0 [drm]
[ 20.292533] [<ffffffffc06e4257>] drm_atomic_commit+0x37/0x60 [drm]
[ 20.292548] [<ffffffffc082ef8f>] restore_fbdev_mode+0x22f/0x260 [drm_kms_helper]
[ 20.292562] [<ffffffffc0831133>] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper]
[ 20.292575] [<ffffffffc08311ad>] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper]
[ 20.292642] [<ffffffffc0916aca>] intel_fbdev_set_par+0x1a/0x60 [i915]
[ 20.292647] [<ffffffff81683210>] fbcon_init+0x570/0x5f0
[ 20.292653] [<ffffffff816f3ac6>] visual_init+0xd6/0x130
[ 20.292658] [<ffffffff816f5721>] do_bind_con_driver+0x1c1/0x3a0
[ 20.292662] [<ffffffff816f5c39>] do_take_over_console+0x149/0x1b0
[ 20.292670] [<ffffffff8167f127>] do_fbcon_takeover+0x57/0xb0
[ 20.292673] [<ffffffff81683c88>] fbcon_event_notify+0x658/0x750
[ 20.292677] [<ffffffff810ab04a>] notifier_call_chain+0x4a/0x70
[ 20.292681] [<ffffffff810ab327>] __blocking_notifier_call_chain+0x47/0x60
[ 20.292685] [<ffffffff810ab356>] blocking_notifier_call_chain+0x16/0x20
[ 20.292689] [<ffffffff816893bb>] fb_notifier_call_chain+0x1b/0x20
[ 20.292692] [<ffffffff8168b6b0>] register_framebuffer+0x200/0x330
[ 20.292706] [<ffffffffc083142d>] drm_fb_helper_initial_config+0x25d/0x3f0 [drm_kms_helper]
[ 20.292773] [<ffffffffc09175bb>] intel_fbdev_initial_config+0x1b/0x20 [i915]
[ 20.292778] [<ffffffff810acaa7>] async_run_entry_fn+0x37/0xe0
[ 20.292782] [<ffffffff810a4baa>] process_one_work+0x14a/0x4b0
[ 20.292786] [<ffffffff810a4f58>] worker_thread+0x48/0x490
[ 20.292790] [<ffffffff810a4f10>] ? process_one_work+0x4b0/0x4b0
[ 20.292794] [<ffffffff810aa2e9>] kthread+0xc9/0xe0
[ 20.292797] [<ffffffff810aa220>] ? kthread_worker_fn+0x160/0x160
[ 20.292802] [<ffffffff81cc9fdf>] ret_from_fork+0x3f/0x70
[ 20.292805] [<ffffffff810aa220>] ? kthread_worker_fn+0x160/0x160
[ 20.292824] ---[ end trace 1bbcbee32b666bcd ]---
[ 20.295273] ------------[ cut here ]------------
[ 20.295365] WARNING: CPU: 2 PID: 6 at drivers/gpu/drm/i915/intel_sideband.c:200 vlv_dpio_read+0x68/0x80 [i915]()
[ 20.295367] DPIO read pipe A reg 0x8000 == 0xffffffff
[ 20.295432] Modules linked in: rt2800usb rt2x00usb rt2800lib rt2x00lib mac80211 cfg80211 crc_ccitt i2c_dev mmc_block evdev joydev uas i915 coretemp hwmon intel_rapl drm_kms_helper intel_powerclamp kvm_intel drm bmc150_accel_i2c bmc150_accel_core kvm intel_gtt agpgart i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt irqbypass crct10dif_pclmul crc32_pclmul efi_pstore crc32c_intel industrialio_triggered_buffer efivars mei_txe kfifo_buf lpc_ich processor_thermal_device mei intel_soc_dts_iosf industrialio thermal regmap_i2c battery hci_uart btbcm btqca 8250_fintek btintel fjes bluetooth dw_dmac dw_dmac_core video sdhci_acpi sdhci rfkill_gpio rfkill iosf_mbi i2c_designware_platform i2c_designware_core tpm_crb tpm_tis mmc_core 8250_dw soc_button_array tpm int3400_thermal int3403_thermal acpi_thermal_rel
[ 20.295438] int340x_thermal_zone pinctrl_cherryview button ac processor acpi_pad
[ 20.295443] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G W 4.4.21-x86_64-wifislax #1
[ 20.295444] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Cherry Trail CR, BIOS C106_B101UAN.608 01/26/2016
[ 20.295453] Workqueue: events_unbound async_run_entry_fn
[ 20.295458] 0000000000000000 ffff880139a3b818 ffffffff81618c08 ffff880139a3b860
[ 20.295462] ffffffffc09668a0 ffff880139a3b850 ffffffff8108d7b2 0000000000000000
[ 20.295465] 0000000000008000 ffff8800afc00000 0000000000008004 0000000000000001
[ 20.295468] Call Trace:
[ 20.295476] [<ffffffff81618c08>] dump_stack+0x4d/0x65
[ 20.295484] [<ffffffff8108d7b2>] warn_slowpath_common+0x82/0xc0
[ 20.295487] [<ffffffff8108d83c>] warn_slowpath_fmt+0x4c/0x50
[ 20.295555] [<ffffffffc0912428>] vlv_dpio_read+0x68/0x80 [i915]
[ 20.295623] [<ffffffffc08f91c8>] i9xx_get_pipe_config+0x588/0x670 [i915]
[ 20.295655] [<ffffffffc06d61cc>] ? drm_property_free_blob+0x8c/0xb0 [drm]
[ 20.295682] [<ffffffffc06d627e>] ? drm_property_unreference_blob+0x8e/0xc0 [drm]
[ 20.295750] [<ffffffffc090082a>] intel_atomic_commit+0x7aa/0x13c0 [i915]
[ 20.295780] [<ffffffffc06e3e1e>] ? drm_atomic_check_only+0x18e/0x590 [drm]
[ 20.295809] [<ffffffffc06e3bc7>] ? drm_atomic_add_affected_connectors+0x27/0xf0 [drm]
[ 20.295839] [<ffffffffc06e4257>] drm_atomic_commit+0x37/0x60 [drm]
[ 20.295854] [<ffffffffc082ef8f>] restore_fbdev_mode+0x22f/0x260 [drm_kms_helper]
[ 20.295868] [<ffffffffc0831133>] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper]
[ 20.295881] [<ffffffffc08311ad>] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper]
[ 20.295948] [<ffffffffc0916aca>] intel_fbdev_set_par+0x1a/0x60 [i915]
[ 20.295953] [<ffffffff81683210>] fbcon_init+0x570/0x5f0
[ 20.295958] [<ffffffff816f3ac6>] visual_init+0xd6/0x130
[ 20.295961] [<ffffffff816f5721>] do_bind_con_driver+0x1c1/0x3a0
[ 20.295965] [<ffffffff816f5c39>] do_take_over_console+0x149/0x1b0
[ 20.295969] [<ffffffff8167f127>] do_fbcon_takeover+0x57/0xb0
[ 20.295972] [<ffffffff81683c88>] fbcon_event_notify+0x658/0x750
[ 20.295976] [<ffffffff810ab04a>] notifier_call_chain+0x4a/0x70
[ 20.295980] [<ffffffff810ab327>] __blocking_notifier_call_chain+0x47/0x60
[ 20.295983] [<ffffffff810ab356>] blocking_notifier_call_chain+0x16/0x20
[ 20.295987] [<ffffffff816893bb>] fb_notifier_call_chain+0x1b/0x20
[ 20.295991] [<ffffffff8168b6b0>] register_framebuffer+0x200/0x330
[ 20.296005] [<ffffffffc083142d>] drm_fb_helper_initial_config+0x25d/0x3f0 [drm_kms_helper]
[ 20.296072] [<ffffffffc09175bb>] intel_fbdev_initial_config+0x1b/0x20 [i915]
[ 20.296076] [<ffffffff810acaa7>] async_run_entry_fn+0x37/0xe0
[ 20.296083] [<ffffffff810a4baa>] process_one_work+0x14a/0x4b0
[ 20.296086] [<ffffffff810a4f58>] worker_thread+0x48/0x490
[ 20.296090] [<ffffffff810a4f10>] ? process_one_work+0x4b0/0x4b0
[ 20.296094] [<ffffffff810aa2e9>] kthread+0xc9/0xe0
[ 20.296097] [<ffffffff810aa220>] ? kthread_worker_fn+0x160/0x160
[ 20.296104] [<ffffffff81cc9fdf>] ret_from_fork+0x3f/0x70
[ 20.296109] [<ffffffff810aa220>] ? kthread_worker_fn+0x160/0x160
[ 20.296113] ---[ end trace 1bbcbee32b666bce ]---
[ 20.298371] ------------[ cut here ]------------
[ 20.298461] WARNING: CPU: 2 PID: 6 at drivers/gpu/drm/i915/intel_sideband.c:200 vlv_dpio_read+0x68/0x80 [i915]()
[ 20.298463] DPIO read pipe A reg 0x8004 == 0xffffffff
[ 20.298530] Modules linked in: rt2800usb rt2x00usb rt2800lib rt2x00lib mac80211 cfg80211 crc_ccitt i2c_dev mmc_block evdev joydev uas i915 coretemp hwmon intel_rapl drm_kms_helper intel_powerclamp kvm_intel drm bmc150_accel_i2c bmc150_accel_core kvm intel_gtt agpgart i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt irqbypass crct10dif_pclmul crc32_pclmul efi_pstore crc32c_intel industrialio_triggered_buffer efivars mei_txe kfifo_buf lpc_ich processor_thermal_device mei intel_soc_dts_iosf industrialio thermal regmap_i2c battery hci_uart btbcm btqca 8250_fintek btintel fjes bluetooth dw_dmac dw_dmac_core video sdhci_acpi sdhci rfkill_gpio rfkill iosf_mbi i2c_designware_platform i2c_designware_core tpm_crb tpm_tis mmc_core 8250_dw soc_button_array tpm int3400_thermal int3403_thermal acpi_thermal_rel
[ 20.298536] int340x_thermal_zone pinctrl_cherryview button ac processor acpi_pad
[ 20.298541] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G W 4.4.21-x86_64-wifislax #1
[ 20.298543] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Cherry Trail CR, BIOS C106_B101UAN.608 01/26/2016
[ 20.298552] Workqueue: events_unbound async_run_entry_fn
[ 20.298557] 0000000000000000 ffff880139a3b818 ffffffff81618c08 ffff880139a3b860
[ 20.298560] ffffffffc09668a0 ffff880139a3b850 ffffffff8108d7b2 0000000000000000
[ 20.298564] 0000000000008004 ffff8800afc00000 0000000000008004 0000000000000001
[ 20.298566] Call Trace:
[ 20.298574] [<ffffffff81618c08>] dump_stack+0x4d/0x65
[ 20.298582] [<ffffffff8108d7b2>] warn_slowpath_common+0x82/0xc0
[ 20.298586] [<ffffffff8108d83c>] warn_slowpath_fmt+0x4c/0x50
[ 20.298653] [<ffffffffc0912428>] vlv_dpio_read+0x68/0x80 [i915]
[ 20.298722] [<ffffffffc08f91d9>] i9xx_get_pipe_config+0x599/0x670 [i915]
[ 20.298754] [<ffffffffc06d61cc>] ? drm_property_free_blob+0x8c/0xb0 [drm]
[ 20.298781] [<ffffffffc06d627e>] ? drm_property_unreference_blob+0x8e/0xc0 [drm]
[ 20.298849] [<ffffffffc090082a>] intel_atomic_commit+0x7aa/0x13c0 [i915]
[ 20.298879] [<ffffffffc06e3e1e>] ? drm_atomic_check_only+0x18e/0x590 [drm]
[ 20.298908] [<ffffffffc06e3bc7>] ? drm_atomic_add_affected_connectors+0x27/0xf0 [drm]
[ 20.298940] [<ffffffffc06e4257>] drm_atomic_commit+0x37/0x60 [drm]
[ 20.298957] [<ffffffffc082ef8f>] restore_fbdev_mode+0x22f/0x260 [drm_kms_helper]
[ 20.298970] [<ffffffffc0831133>] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper]
[ 20.298983] [<ffffffffc08311ad>] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper]
[ 20.299050] [<ffffffffc0916aca>] intel_fbdev_set_par+0x1a/0x60 [i915]
[ 20.299057] [<ffffffff81683210>] fbcon_init+0x570/0x5f0
[ 20.299064] [<ffffffff816f3ac6>] visual_init+0xd6/0x130
[ 20.299069] [<ffffffff816f5721>] do_bind_con_driver+0x1c1/0x3a0
[ 20.299073] [<ffffffff816f5c39>] do_take_over_console+0x149/0x1b0
[ 20.299078] [<ffffffff8167f127>] do_fbcon_takeover+0x57/0xb0
[ 20.299081] [<ffffffff81683c88>] fbcon_event_notify+0x658/0x750
[ 20.299087] [<ffffffff810ab04a>] notifier_call_chain+0x4a/0x70
[ 20.299092] [<ffffffff810ab327>] __blocking_notifier_call_chain+0x47/0x60
[ 20.299096] [<ffffffff810ab356>] blocking_notifier_call_chain+0x16/0x20
[ 20.299101] [<ffffffff816893bb>] fb_notifier_call_chain+0x1b/0x20
[ 20.299105] [<ffffffff8168b6b0>] register_framebuffer+0x200/0x330
[ 20.299119] [<ffffffffc083142d>] drm_fb_helper_initial_config+0x25d/0x3f0 [drm_kms_helper]
[ 20.299186] [<ffffffffc09175bb>] intel_fbdev_initial_config+0x1b/0x20 [i915]
[ 20.299190] [<ffffffff810acaa7>] async_run_entry_fn+0x37/0xe0
[ 20.299197] [<ffffffff810a4baa>] process_one_work+0x14a/0x4b0
[ 20.299200] [<ffffffff810a4f58>] worker_thread+0x48/0x490
[ 20.299204] [<ffffffff810a4f10>] ? process_one_work+0x4b0/0x4b0
[ 20.299209] [<ffffffff810aa2e9>] kthread+0xc9/0xe0
[ 20.299213] [<ffffffff810aa220>] ? kthread_worker_fn+0x160/0x160
[ 20.299225] [<ffffffff81cc9fdf>] ret_from_fork+0x3f/0x70
[ 20.299228] [<ffffffff810aa220>] ? kthread_worker_fn+0x160/0x160
[ 20.299232] ---[ end trace 1bbcbee32b666bcf ]---
[ 20.301617] ------------[ cut here ]------------
[ 20.301852] WARNING: CPU: 2 PID: 6 at drivers/gpu/drm/i915/intel_sideband.c:200 vlv_dpio_read+0x68/0x80 [i915]()
[ 20.301858] DPIO read pipe A reg 0x8008 == 0xffffffff
[ 20.301962] Modules linked in: rt2800usb rt2x00usb rt2800lib rt2x00lib mac80211 cfg80211 crc_ccitt i2c_dev mmc_block evdev joydev uas i915 coretemp hwmon intel_rapl drm_kms_helper intel_powerclamp kvm_intel drm bmc150_accel_i2c bmc150_accel_core kvm intel_gtt agpgart i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt irqbypass crct10dif_pclmul crc32_pclmul efi_pstore crc32c_intel industrialio_triggered_buffer efivars mei_txe kfifo_buf lpc_ich processor_thermal_device mei intel_soc_dts_iosf industrialio thermal regmap_i2c battery hci_uart btbcm btqca 8250_fintek btintel fjes bluetooth dw_dmac dw_dmac_core video sdhci_acpi sdhci rfkill_gpio rfkill iosf_mbi i2c_designware_platform i2c_designware_core tpm_crb tpm_tis mmc_core 8250_dw soc_button_array tpm int3400_thermal int3403_thermal acpi_thermal_rel
[ 20.301968] int340x_thermal_zone pinctrl_cherryview button ac processor acpi_pad
[ 20.301972] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G W 4.4.21-x86_64-wifislax #1
[ 20.301974] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Cherry Trail CR, BIOS C106_B101UAN.608 01/26/2016
[ 20.301983] Workqueue: events_unbound async_run_entry_fn
[ 20.301988] 0000000000000000 ffff880139a3b818 ffffffff81618c08 ffff880139a3b860
[ 20.301991] ffffffffc09668a0 ffff880139a3b850 ffffffff8108d7b2 0000000000000000
[ 20.301994] 0000000000008008 ffff8800afc00000 0000000000008004 0000000000000001
[ 20.301995] Call Trace:
[ 20.302004] [<ffffffff81618c08>] dump_stack+0x4d/0x65
[ 20.302010] [<ffffffff8108d7b2>] warn_slowpath_common+0x82/0xc0
[ 20.302013] [<ffffffff8108d83c>] warn_slowpath_fmt+0x4c/0x50
[ 20.302081] [<ffffffffc0912428>] vlv_dpio_read+0x68/0x80 [i915]
[ 20.302149] [<ffffffffc08f91ea>] i9xx_get_pipe_config+0x5aa/0x670 [i915]
[ 20.302180] [<ffffffffc06d61cc>] ? drm_property_free_blob+0x8c/0xb0 [drm]
[ 20.302207] [<ffffffffc06d627e>] ? drm_property_unreference_blob+0x8e/0xc0 [drm]
[ 20.302276] [<ffffffffc090082a>] intel_atomic_commit+0x7aa/0x13c0 [i915]
[ 20.302306] [<ffffffffc06e3e1e>] ? drm_atomic_check_only+0x18e/0x590 [drm]
[ 20.302335] [<ffffffffc06e3bc7>] ? drm_atomic_add_affected_connectors+0x27/0xf0 [drm]
[ 20.302365] [<ffffffffc06e4257>] drm_atomic_commit+0x37/0x60 [drm]
[ 20.302380] [<ffffffffc082ef8f>] restore_fbdev_mode+0x22f/0x260 [drm_kms_helper]
[ 20.302394] [<ffffffffc0831133>] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper]
[ 20.302407] [<ffffffffc08311ad>] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper]
[ 20.302474] [<ffffffffc0916aca>] intel_fbdev_set_par+0x1a/0x60 [i915]
[ 20.302479] [<ffffffff81683210>] fbcon_init+0x570/0x5f0
[ 20.302484] [<ffffffff816f3ac6>] visual_init+0xd6/0x130
[ 20.302487] [<ffffffff816f5721>] do_bind_con_driver+0x1c1/0x3a0
[ 20.302491] [<ffffffff816f5c39>] do_take_over_console+0x149/0x1b0
[ 20.302495] [<ffffffff8167f127>] do_fbcon_takeover+0x57/0xb0
[ 20.302498] [<ffffffff81683c88>] fbcon_event_notify+0x658/0x750
[ 20.302502] [<ffffffff810ab04a>] notifier_call_chain+0x4a/0x70
[ 20.302506] [<ffffffff810ab327>] __blocking_notifier_call_chain+0x47/0x60
[ 20.302510] [<ffffffff810ab356>] blocking_notifier_call_chain+0x16/0x20
[ 20.302513] [<ffffffff816893bb>] fb_notifier_call_chain+0x1b/0x20
[ 20.302517] [<ffffffff8168b6b0>] register_framebuffer+0x200/0x330
[ 20.302531] [<ffffffffc083142d>] drm_fb_helper_initial_config+0x25d/0x3f0 [drm_kms_helper]
[ 20.302598] [<ffffffffc09175bb>] intel_fbdev_initial_config+0x1b/0x20 [i915]
[ 20.302602] [<ffffffff810acaa7>] async_run_entry_fn+0x37/0xe0
[ 20.302607] [<ffffffff810a4baa>] process_one_work+0x14a/0x4b0
[ 20.302611] [<ffffffff810a4f58>] worker_thread+0x48/0x490
[ 20.302615] [<ffffffff810a4f10>] ? process_one_work+0x4b0/0x4b0
[ 20.302618] [<ffffffff810aa2e9>] kthread+0xc9/0xe0
[ 20.302622] [<ffffffff810aa220>] ? kthread_worker_fn+0x160/0x160
[ 20.302626] [<ffffffff81cc9fdf>] ret_from_fork+0x3f/0x70
[ 20.302630] [<ffffffff810aa220>] ? kthread_worker_fn+0x160/0x160
[ 20.302659] ---[ end trace 1bbcbee32b666bd0 ]---
[ 20.305576] ------------[ cut here ]------------
[ 20.305668] WARNING: CPU: 2 PID: 6 at drivers/gpu/drm/i915/intel_sideband.c:200 vlv_dpio_read+0x68/0x80 [i915]()
[ 20.305671] DPIO read pipe A reg 0x800c == 0xffffffff
[ 20.305735] Modules linked in: rt2800usb rt2x00usb rt2800lib rt2x00lib mac80211 cfg80211 crc_ccitt i2c_dev mmc_block evdev joydev uas i915 coretemp hwmon intel_rapl drm_kms_helper intel_powerclamp kvm_intel drm bmc150_accel_i2c bmc150_accel_core kvm intel_gtt agpgart i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt irqbypass crct10dif_pclmul crc32_pclmul efi_pstore crc32c_intel industrialio_triggered_buffer efivars mei_txe kfifo_buf lpc_ich processor_thermal_device mei intel_soc_dts_iosf industrialio thermal regmap_i2c battery hci_uart btbcm btqca 8250_fintek btintel fjes bluetooth dw_dmac dw_dmac_core video sdhci_acpi sdhci rfkill_gpio rfkill iosf_mbi i2c_designware_platform i2c_designware_core tpm_crb tpm_tis mmc_core 8250_dw soc_button_array tpm int3400_thermal int3403_thermal acpi_thermal_rel
[ 20.305741] int340x_thermal_zone pinctrl_cherryview button ac processor acpi_pad
[ 20.305747] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G W 4.4.21-x86_64-wifislax #1
[ 20.305749] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Cherry Trail CR, BIOS C106_B101UAN.608 01/26/2016
[ 20.305757] Workqueue: events_unbound async_run_entry_fn
[ 20.305762] 0000000000000000 ffff880139a3b818 ffffffff81618c08 ffff880139a3b860
[ 20.305766] ffffffffc09668a0 ffff880139a3b850 ffffffff8108d7b2 0000000000000000
[ 20.305769] 000000000000800c ffff8800afc00000 00000000ffffffff 0000000000000001
[ 20.305772] Call Trace:
[ 20.305780] [<ffffffff81618c08>] dump_stack+0x4d/0x65
[ 20.305786] [<ffffffff8108d7b2>] warn_slowpath_common+0x82/0xc0
[ 20.305790] [<ffffffff8108d83c>] warn_slowpath_fmt+0x4c/0x50
[ 20.305858] [<ffffffffc0912428>] vlv_dpio_read+0x68/0x80 [i915]
[ 20.305926] [<ffffffffc08f91fb>] i9xx_get_pipe_config+0x5bb/0x670 [i915]
[ 20.305958] [<ffffffffc06d61cc>] ? drm_property_free_blob+0x8c/0xb0 [drm]
[ 20.305985] [<ffffffffc06d627e>] ? drm_property_unreference_blob+0x8e/0xc0 [drm]
[ 20.306054] [<ffffffffc090082a>] intel_atomic_commit+0x7aa/0x13c0 [i915]
[ 20.306083] [<ffffffffc06e3e1e>] ? drm_atomic_check_only+0x18e/0x590 [drm]
[ 20.306113] [<ffffffffc06e3bc7>] ? drm_atomic_add_affected_connectors+0x27/0xf0 [drm]
[ 20.306142] [<ffffffffc06e4257>] drm_atomic_commit+0x37/0x60 [drm]
[ 20.306158] [<ffffffffc082ef8f>] restore_fbdev_mode+0x22f/0x260 [drm_kms_helper]
[ 20.306172] [<ffffffffc0831133>] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper]
[ 20.306185] [<ffffffffc08311ad>] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper]
[ 20.306252] [<ffffffffc0916aca>] intel_fbdev_set_par+0x1a/0x60 [i915]
[ 20.306257] [<ffffffff81683210>] fbcon_init+0x570/0x5f0
[ 20.306264] [<ffffffff816f3ac6>] visual_init+0xd6/0x130
[ 20.306269] [<ffffffff816f5721>] do_bind_con_driver+0x1c1/0x3a0
[ 20.306273] [<ffffffff816f5c39>] do_take_over_console+0x149/0x1b0
[ 20.306278] [<ffffffff8167f127>] do_fbcon_takeover+0x57/0xb0
[ 20.306281] [<ffffffff81683c88>] fbcon_event_notify+0x658/0x750
[ 20.306285] [<ffffffff810ab04a>] notifier_call_chain+0x4a/0x70
[ 20.306291] [<ffffffff810ab327>] __blocking_notifier_call_chain+0x47/0x60
[ 20.306295] [<ffffffff810ab356>] blocking_notifier_call_chain+0x16/0x20
[ 20.306300] [<ffffffff816893bb>] fb_notifier_call_chain+0x1b/0x20
[ 20.306305] [<ffffffff8168b6b0>] register_framebuffer+0x200/0x330
[ 20.306319] [<ffffffffc083142d>] drm_fb_helper_initial_config+0x25d/0x3f0 [drm_kms_helper]
[ 20.306386] [<ffffffffc09175bb>] intel_fbdev_initial_config+0x1b/0x20 [i915]
[ 20.306391] [<ffffffff810acaa7>] async_run_entry_fn+0x37/0xe0
[ 20.306397] [<ffffffff810a4baa>] process_one_work+0x14a/0x4b0
[ 20.306401] [<ffffffff810a4f58>] worker_thread+0x48/0x490
[ 20.306405] [<ffffffff810a4f10>] ? process_one_work+0x4b0/0x4b0
[ 20.306410] [<ffffffff810aa2e9>] kthread+0xc9/0xe0
[ 20.306413] [<ffffffff810aa220>] ? kthread_worker_fn+0x160/0x160
[ 20.306418] [<ffffffff81cc9fdf>] ret_from_fork+0x3f/0x70
[ 20.306422] [<ffffffff810aa220>] ? kthread_worker_fn+0x160/0x160
[ 20.306443] ---[ end t
-
@teik
men , ves a tu windows y desactivale el fast boot anda ;D
esta en las opciones de energia , rebusca y desmarca la casilla que ponga algo de fast boot.
***********
Hoy he mirado lo de instalar en la micro sd , ..y resulta que la que tengo es de solo 2 gigas,..juas juas juas
Tendria que comprar una de 16gb
-
@teik
men , ves a tu windows y desactivale el fast boot anda ;D
esta en las opciones de energia , rebusca y desmarca la casilla que ponga algo de fast boot.
Cómo lo sabes? Que has visto para llegar a esa conclusión?
Hoy he mirado lo de instalar en la micro sd , ..y resulta que la que tengo es de solo 2 gigas,..juas juas juas
Tendria que comprar una de 16gb
No es necesario. Copia en la SD solo la carpeta /boot
Tienes que probar el instalador del arranque, no todo el sistema.
Salu2
-
@teik
men , ves a tu windows y desactivale el fast boot anda ;D
esta en las opciones de energia , rebusca y desmarca la casilla que ponga algo de fast boot.
***********
Hoy he mirado lo de instalar en la micro sd , ..y resulta que la que tengo es de solo 2 gigas,..juas juas juas
Tendria que comprar una de 16gb
El fast boot como quiet boot lo tengo desactivado ya que sino a penas me dejaba un segundo para entrar a la bios y fue lo primero que desactive para arrancar usb. De hecho lo acabo de mirar y esta desactivado.
Saludos
-
el fast boot no esta en la bios...esta dento de win
-
Perdon, al verlo en bios pensaba que era suficiente con tenerlo disabled. Ya lo he desayivado desde windows, pero sigo sin poder ver la particion EFI desde wfislax, ni montarla desde gparted.
Saludos
-
Perdon, al verlo en bios pensaba que era suficiente con tenerlo disabled. Ya lo he desayivado desde windows, pero sigo sin poder ver la particion EFI desde wfislax, ni montarla desde gparted.
Saludos
la particion EFI ni la tienes que ver ni montar.
te sigue dando el mismo error ?
-
Perdon, al verlo en bios pensaba que era suficiente con tenerlo disabled. Ya lo he desayivado desde windows, pero sigo sin poder ver la particion EFI desde wfislax, ni montarla desde gparted.
Saludos
la particion EFI ni la tienes que ver ni montar.
te sigue dando el mismo error ?
Sigo igual y lanzandolo desde la terminal me ponen las mismas lineas que ya puse por aqui. Toda una incognita lo se :-\
-
la particion ext4 , que tamaño le das ?¿
necesita minimo 10gb.
a otros les ha pasado lo mismo , el paso del grub da error, por que la instalacion al hdd no esta completa
-
Si jejej, yo he sido de esos en el pasado, le tengo puesto 11gigas para la instalacion.
Saludos
-
hi
Al añadir la carpeta EFI, ya no me es necesario ejecutar "Windows_Wifislax_Boot_Installer.exe" para que el pendrive arranque.
no se si ya lo habéis comentado >:D
-
hi
Al añadir la carpeta EFI, ya no me es necesario ejecutar "Windows_Wifislax_Boot_Installer.exe" para que el pendrive arranque.
no se si ya lo habéis comentado >:D
la carpeta efi actua en equipos con ese arranque.
si no ejecutas el bootinstaller , cuando lo metas a un equipo con bios, tururu.