Seguridad Wireless - Wifi

Suite Seguridad Wireless => Colaboracion y desarrollo de nuestras lives => Mensaje iniciado por: USUARIONUEVO en 14-06-2014, 08:27 (Sábado)

Título: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 08:27 (Sábado)
Configuración 2 para kernel 3.15 , parece que lo de teclado/raton esta arreglado ,pero hay problemas con las configs de los usb...he reconfigurado los usb,


cambios de la v1 a la v2


13/06/2014

01 - Actualizados firmwares a 13062014
02 - Actualizado ghost-pisher 1.62 -->> 1.63
03 - Actualizado linset 0.13_rev33 -->> 0.13_rev34
04 - Actualizado wireshark  1.10.7 -->> 1.10.8
05 - Incluida libreria c-ares
06 - Actualizada patrones-conocidos 13062014
07 - Actualizado goyscript con un nuevo pin generico wps
08 - Actualizado gparted 0.18.0 -->> 0.19.0
09 - Kernel 3.15-2 reconfigurados usb y activados mas drivers ethernet



http://www.downloadwireless.net/isos-fase-testing/wifislax-current/wifislax-4.9-14062014.iso

MD5 -->> 52b178df5984aa2e7b95ff8c32be7ee2
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: Hacelo en 14-06-2014, 10:01 (Sábado)
Hola, aquí te dejo las pruebas que he realizado:

Escritorio…..elijo el KDE pero carga el XFE DESKTOP. Solo me arranca con el KDE si elijo la opción de copiado en RAM.

Ratón…….OK

Teclado…..OK

Otra cosa, cuando esta arrancando el sistema, al cargar la interfaces arroja el siguiente mensaje:

Detectando interfaces...
amixer: Mixer attach default error: No such file or directory
/usr/sbin/alsact1: save_state:1580: No soundcards found …

Y no me funciona ni la tarjeta de sonido, ni la tarjeta de red inalámbrica interna, ni una de red  inalámbrica externa.

Hay que ver lo rebeldes que son algunas maquinas…… ;)
 
Saludos y muchas gracias.
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 12:24 (Sábado)
@Hacelo

ni es la maquina ni es el livecd ... haz calculos.


1 - ¿ te has fijado si al arrancar te sale que no se puede leer algun modulo ?


__________________________

eres tu el que lo hace mal ... no se lo que haces por que no lo dices, pero si lo hicieras bien , te arrancaria como debe.


que no pueda ejecutarse el amixer , es por que el modulo "core" , no se esta leyendo ..sin core olvidate de sistema ...


se ha explicado muchisimas veces...

1 - de tu pendrive elimina las carpetas anterioes  bott y wifislax ... Y SI TIENES CARPETA CHANGES TAMBIEN , Lo ideal seria que formatearas el pendrive



1 - formatear pendrive  FAT32
2 - copiar a tu pendrive las carpetas boot y wifislax
3 - ejecutar el arrancador ..o bien el  bootinst.sh o el ejecutable del icono rojo.  (cuando ya este todo copiado al pendrive , no antes)

y ya esta , asi de sencillo ...si usas unetbootings..o  "multi live cds"  ..o cosas que no son lo que yo posteo , te arriesgas a esas cosas que te pasan.


si tienes informacion en tu pendrive que no quieres perder ... pues copiate lo que quieras salvar al disco duro ...

pero te doy mi palabra de que lo que te pasa a ti , no es error ni de tu maquina ni del live.


que te arranque siempre xfce ya es que los menus los tienes mal ...a saber cuales menus tienes tu , .. o si es un multi con varios livecd..pues hay tienes tu problema...pero algo llevas mal.


te doy la brasa para que lo mires bien , si no te pasara lo mismo siempre con todas , pero el livecd esta bien en ese sentido ... que no detente un adaptador vale , pero que no te detecte medio sistema..ya... como que no es ni medio normal ..y es que como digo algo no llevas bien.
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: pepe10000 en 14-06-2014, 13:27 (Sábado)
Me ha dado por probar esta ISO en el portátil Pavilion DV5 y he observado que el mando a distancia no funciona.
Lo demás en un principio todo bien.
Un saludo.
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 13:33 (Sábado)
Me ha dado por probar esta ISO en el portátil Pavilion DV5 y he observado que el mando a distancia no funciona.
Lo demás en un principio todo bien.
Un saludo.


modelo del mano . o marca por lo menos ...  ;)

de lo que os deje de funcionar dadme info please-  >:( >:D

pepe , el mando ese imagino que llevara algun adaptador-base que se conete por usb ..?no¿

conectalo .. y haz en consola

Código: [Seleccionar]
dmesg
las ultimas lineas seran de cuando has conectado , asi poder ver si hay algun mensaje de error.
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 13:39 (Sábado)
Para los que quieran aportar algo que les ha dejado de funcionar..

Código: [Seleccionar]
dmesg

si es un  dispositivo usb ..

1 - desconectarlo
2 - conectarlo
3 - dmesg
4 - pasadme las 10 ultimas lineas del dmesg
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: pepe10000 en 14-06-2014, 13:45 (Sábado)
Me ha dado por probar esta ISO en el portátil Pavilion DV5 y he observado que el mando a distancia no funciona.
Lo demás en un principio todo bien.
Un saludo.


modelo del mano . o marca por lo menos ...  ;)

de lo que os deje de funcionar dadme info please-  >:( >:D

pepe , el mando ese imagino que llevara algun adaptador-base que se conete por usb ..?no¿

conectalo .. y haz en consola

Código: [Seleccionar]
dmesg
las ultimas lineas seran de cuando has conectado , asi poder ver si hay algun mensaje de error.

El mando está incorporado al sistema, no es USB, forma parte de la placa base.
En el Wifislax 4.9 normal si funciona bien.
Voy ha hacer lo del dmesg a ver que dice y en un rato te cuento.

Editado.


Menudo pedazo listado, lo he subido a Tusfiles entero por si te sirve para algo, enlace:

http://www.tusfiles.net/gw740211qvnd

Un saludo.
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 14:14 (Sábado)
pff , siempre me intenta colar dmesg.exe  ....    :P :P :P

no he podido bajar el fichero....  

Código: [Seleccionar]
lspci
para listar los dispositivos pci


edit: ya he podido bajar el dmesg ,pero no veo nada..seguramente no este ,por que ningun driver la reclame.


entiendo que es una placa base ,con un mando a distancia ??  , un media center ??

sabes modelo de placa base ??
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: SUBGEM en 14-06-2014, 15:05 (Sábado)
CAPO USUARIO NUEVO : 

GRANDE MAESTRO  TE AGRADECERIA PUEDAS ARREGLAR  EL ENLACE DE DESCARGA NO FUNCIONA   


SUBGEM
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: Hacelo en 14-06-2014, 15:27 (Sábado)
1 - formatear pendrive  FAT32
2 - copiar a tu pendrive las carpetas boot y wifislax
3 - ejecutar el arrancador ..o bien el  bootinst.sh o el ejecutable del icono rojo. 

Hola, yo en un principio el pen-driver que utilizo para las pruebas lo formateo siempre a FAT32 en cada ISO que pruebo, y ejecuto el Wifislax Boot Installer antes de bootearlo.


1 - ¿ te has fijado si al arrancar te sale que no se puede leer algun modulo ?



Respecto a si lee todos los módulos te diría que si, pues no me arroja ningún error durante el arranque.

Ahora bien…. visto que con este ordenador no hago carrera, me quedo un poco al margen, pero si requieres de algún dato más me lo pides que gustosamente te lo reportare.

Saludos y gracias.
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: pepe10000 en 14-06-2014, 15:47 (Sábado)
pff , siempre me intenta colar dmesg.exe  ....    :P :P :P

no he podido bajar el fichero....  

Código: [Seleccionar]
lspci
para listar los dispositivos pci


edit: ya he podido bajar el dmesg ,pero no veo nada..seguramente no este ,por que ningun driver la reclame.


entiendo que es una placa base ,con un mando a distancia ??  , un media center ??

sabes modelo de placa base ??

Si, hay que desmarcar la casilla de "Use Download manager......" para poder bajar archivos en Tusfiles.

Descarga Lspci:

http://www.tusfiles.net/uu9de81kwdy6

La placa base lleva incorporado un receptor de IR que viene de serie, y el mando es una especie de Mando Media Center, en Wifislax normal me sirve para cambiar el volumen y manejarme por los iconos del escritorio, cambiar de canciones si tienes un reproductor de música en marcha, etc.
En el XBMC tiene mas funciones que descubrí el otro día cuando hice las pruebas del modulo que posteaste.

Te adjunto unas fotos para que lo veas (picar en la imagen para ampliar):

(http://es.zimagez.com/miniature/img20140614152851.jpg) (http://es.zimagez.com/zimage/img20140614152851.php)

(http://es.zimagez.com/miniature/img20140614152933.jpg) (http://es.zimagez.com/zimage/img20140614152933.php)

(http://es.zimagez.com/miniature/img20140614153109.jpg) (http://es.zimagez.com/zimage/img20140614153109.php)

(http://es.zimagez.com/miniature/img20140614153149.jpg) (http://es.zimagez.com/zimage/img20140614153149.php)

La placa madre de la foto es la averiada pero es exactamente la misma que la que tengo puesta ahora.

Un saludo.
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: fifoko en 14-06-2014, 15:55 (Sábado)
sigue sin reconocer la tarjeta de red ,aki el nuevo test
 
wifislax ~ # modprobe rtl8187
wifislax ~ # dmesg
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.15.0-wifislax (root@wifislax) (gcc version 4.8.3 (GCC) ) #1 SMP PREEMPT Sat Jun 14 02:30:26 CEST 2014
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037faffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000037fb0000-0x0000000037fbffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000037fc0000-0x0000000037feffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000037ff0000-0x0000000037ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff380000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AM2NF6G-VSTA, BIOS P2.00 02/06/2007
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x37fb0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[    0.000000]  [mem 0x37000000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[    0.000000]  [mem 0x30000000-0x36ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x0166e000, 0x0166efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37ef7000-0x37faefff]
[    0.000000] Allocated new RAMDISK: [mem 0x37746000-0x377fd9ff]
[    0.000000] Move RAMDISK from [mem 0x37ef7000-0x37fae9ff] to [mem 0x37746000-0x377fd9ff]
[    0.000000] ACPI: RSDP 0x000FA870 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x37FB0000 000034 (v01 A_M_I  OEMRSDT  02000706 MSFT 00000097)
[    0.000000] ACPI: FACP 0x37FB0200 000084 (v02 A M I  OEMFACP  12000601 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x37FB0440 004BE8 (v01 AM2N6  AM2N6191 00000191 INTL 20051117)
[    0.000000] ACPI: FACS 0x37FC0000 000040
[    0.000000] ACPI: APIC 0x37FB0390 000070 (v01 A_M_I  OEMAPIC  02000706 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x37FB0400 00003C (v01 A_M_I  OEMMCFG  02000706 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x37FC0040 000060 (v01 A_M_I  AMI_OEM  02000706 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 7MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x0166f000, 0x0166ffff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x37faffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x37faffff]
[    0.000000] On node 0 totalpages: 229198
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 16 pages used for memmap
[    0.000000]   HighMem zone: 1970 pages, LIFO batch:0
[    0.000000] Using APIC driver default
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[    0.000000] e820: [mem 0x38000000-0xfebfffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f7028000 s28032 r0 d21120 u49152
[    0.000000] pcpu-alloc: s28032 r0 d21120 u49152 alloc=12*4096
[    0.000000] pcpu-alloc:
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227422
[    0.000000] Kernel command line: quiet initrd=/boot/initrd.xz vga=788 noload=000-PAE;012-X;013-W autoexec=telinit~4 BOOT_IMAGE=/boot/vmlinuz
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:00037fb0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 901308K/916792K available (4319K kernel code, 317K rwdata, 1004K rodata, 504K init, 380K bss, 15484K reserved, 7880K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd37000 - 0xfffff000   (2848 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc1586000 - 0xc1604000   ( 504 kB)
[    0.000000]       .data : 0xc14382a0 - 0xc1584780   (1329 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14382a0   (4320 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]  RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1607.345 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.001012] Calibrating delay loop (skipped), value calculated using timer frequency.. 3214.69 BogoMIPS (lpj=1607345)
[    0.001017] pid_max: default: 32768 minimum: 301
[    0.001027] ACPI: Core revision 20140214
[    0.006419] ACPI: All ACPI Tables successfully acquired
[    0.006796] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006800] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.007083] Initializing cgroup subsys net_cls
[    0.007111] mce: CPU supports 5 MCE banks
[    0.007120] LVT offset 0 assigned for vector 0xf9
[    0.007125] process: using AMD E400 aware idle routine
[    0.007132] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.007132] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.007132] tlb_flushall_shift: 6
[    0.009645] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.010209] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.020226] smpboot: CPU0: AMD Sempron(tm) Processor 3000+ (fam: 0f, model: 4f, stepping: 02)
[    0.021000] Performance Events: AMD PMU driver.
[    0.021000] ... version:                0
[    0.021000] ... bit width:              48
[    0.021000] ... generic registers:      4
[    0.021000] ... value mask:             0000ffffffffffff
[    0.021000] ... max period:             00007fffffffffff
[    0.021000] ... fixed-purpose events:   0
[    0.021000] ... event mask:             000000000000000f
[    0.024088] x86: Booted up 1 node, 1 CPUs
[    0.024092] smpboot: Total of 1 processors activated (3214.69 BogoMIPS)
[    0.024491] devtmpfs: initialized
[    0.024909] PM: Registering ACPI NVS region [mem 0x37fc0000-0x37feffff] (196608 bytes)
[    0.025038] pinctrl core: initialized pinctrl subsystem
[    0.025129] NET: Registered protocol family 16
[    0.025407] EISA bus registered
[    0.025411] cpuidle: using governor ladder
[    0.025413] cpuidle: using governor menu
[    0.025419] node 0 link 0: io port [1000, ffffff]
[    0.025423] TOM: 0000000040000000 aka 1024M
[    0.025427] node 0 link 0: mmio [e0000000, efffffff]
[    0.025432] node 0 link 0: mmio [a0000, bffff]
[    0.025436] node 0 link 0: mmio [40000000, fe0bffff]
[    0.025440] bus: [bus 00-ff] on node 0 link 0
[    0.025443] bus: 00 [io  0x0000-0xffff]
[    0.025446] bus: 00 [mem 0x40000000-0xffffffff]
[    0.025448] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.025559] ACPI: bus type PCI registered
[    0.025563] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.025681] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.025685] PCI: not using MMCONFIG
[    0.026441] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[    0.026443] PCI: Using configuration type 1 for base access
[    0.031301] ACPI: Added _OSI(Module Device)
[    0.031306] ACPI: Added _OSI(Processor Device)
[    0.031309] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.031312] ACPI: Added _OSI(Processor Aggregator Device)
[    0.033896] ACPI: Executed 1 blocks of module-level executable AML code
[    0.036753] ACPI: Interpreter enabled
[    0.036775] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[    0.036781] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140214/hwxface-580)
[    0.036796] ACPI: (supports S0 S1 S4 S5)
[    0.036799] ACPI: Using IOAPIC for interrupt routing
[    0.036830] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.038208] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.038211] PCI: Using MMCONFIG for extended config space
[    0.038348] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.048381] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.048393] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.048720] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.048864] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.048869] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.048873] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.048877] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.048881] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xff37ffff] (ignored)
[    0.048885] PCI: root bus 00: hardware-probed resources
[    0.049167] PCI host bridge to bus 0000:00
[    0.049173] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.049177] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.049181] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff]
[    0.049185] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.049213] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[    0.049487] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[    0.049631] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[    0.049645] pci 0000:00:01.1: reg 0x10: [io  0xec00-0xec3f]
[    0.049664] pci 0000:00:01.1: reg 0x20: [io  0x5000-0x503f]
[    0.049672] pci 0000:00:01.1: reg 0x24: [io  0x6000-0x603f]
[    0.049705] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.049754] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.049863] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[    0.050016] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[    0.050028] pci 0000:00:02.0: reg 0x10: [mem 0xdffff000-0xdfffffff]
[    0.050068] pci 0000:00:02.0: supports D1 D2
[    0.050072] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.050115] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.050201] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[    0.050214] pci 0000:00:02.1: reg 0x10: [mem 0xdfffec00-0xdfffecff]
[    0.050261] pci 0000:00:02.1: supports D1 D2
[    0.050265] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.050311] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.050402] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[    0.050473] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.050563] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[    0.050577] pci 0000:00:05.0: reg 0x10: [mem 0xdfff8000-0xdfffbfff]
[    0.050626] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.050670] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.050763] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[    0.050788] pci 0000:00:06.0: reg 0x20: [io  0xffa0-0xffaf]
[    0.050801] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.050805] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.050809] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.050813] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.050930] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[    0.050943] pci 0000:00:07.0: reg 0x10: [mem 0xdfffd000-0xdfffdfff]
[    0.050950] pci 0000:00:07.0: reg 0x14: [io  0xe480-0xe487]
[    0.050991] pci 0000:00:07.0: supports D1 D2
[    0.050995] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.051052] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.051140] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[    0.051152] pci 0000:00:08.0: reg 0x10: [io  0x0e00-0x0e07]
[    0.051159] pci 0000:00:08.0: reg 0x14: [io  0x0e20-0x0e23]
[    0.051165] pci 0000:00:08.0: reg 0x18: [io  0x0e40-0x0e47]
[    0.051172] pci 0000:00:08.0: reg 0x1c: [io  0x0e60-0x0e63]
[    0.051179] pci 0000:00:08.0: reg 0x20: [io  0xd880-0xd88f]
[    0.051186] pci 0000:00:08.0: reg 0x24: [mem 0xdfffc000-0xdfffcfff]
[    0.051321] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[    0.051357] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.051400] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.051535] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[    0.051569] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.051615] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.051706] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[    0.051740] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.051784] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.051871] pci 0000:00:0d.0: [10de:03d1] type 00 class 0x030000
[    0.051881] pci 0000:00:0d.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.051890] pci 0000:00:0d.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.051898] pci 0000:00:0d.0: reg 0x1c: [mem 0xdd000000-0xddffffff 64bit]
[    0.051907] pci 0000:00:0d.0: reg 0x30: [mem 0xdffc0000-0xdffdffff pref]
[    0.052055] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.052170] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.052275] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.052382] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.052577] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[    0.052585] pci 0000:00:04.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.052590] pci 0000:00:04.0:   bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
[    0.052594] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.052671] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.052748] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.052813] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.052830] pci_bus 0000:00: on NUMA node 0
[    0.054059] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.054191] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.054319] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.054445] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.054571] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.054698] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.054824] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.054950] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[    0.055126] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.055250] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[    0.055373] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[    0.055506] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[    0.055630] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[    0.055754] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
[    0.055877] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.056020] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.056146] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[    0.056277] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[    0.056420] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.056568] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.056734] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[    0.056739] vgaarb: loaded
[    0.056741] vgaarb: bridge control possible 0000:00:0d.0
[    0.056965] SCSI subsystem initialized
[    0.057074] libata version 3.00 loaded.
[    0.057082] ACPI: bus type USB registered
[    0.057145] usbcore: registered new interface driver usbfs
[    0.057171] usbcore: registered new interface driver hub
[    0.057236] usbcore: registered new device driver usb
[    0.057283] Linux video capture interface: v2.00
[    0.057407] Advanced Linux Sound Architecture Driver Initialized.
[    0.057410] PCI: Using ACPI for IRQ routing
[    0.057415] PCI: pci_cache_line_size set to 64 bytes
[    0.057457] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.057461] e820: reserve RAM buffer [mem 0x37fb0000-0x37ffffff]
[    0.057817] Switched to clocksource refined-jiffies
[    0.057912] pnp: PnP ACPI init
[    0.057932] ACPI: bus type PNP registered
[    0.057986] pnp 00:00: [dma 4]
[    0.058063] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.058133] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.058190] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.058246] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.058727] pnp 00:04: [dma 2]
[    0.058812] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.059232] pnp 00:05: [dma 3]
[    0.059405] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.060317] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.060323] system 00:06: [io  0x0800-0x080f] has been reserved
[    0.060328] system 00:06: [io  0x4000-0x407f] could not be reserved
[    0.060332] system 00:06: [io  0x4080-0x40ff] has been reserved
[    0.060337] system 00:06: [io  0x4400-0x447f] has been reserved
[    0.060341] system 00:06: [io  0x4480-0x44ff] has been reserved
[    0.060345] system 00:06: [io  0x4800-0x487f] has been reserved
[    0.060350] system 00:06: [io  0x4880-0x48ff] has been reserved
[    0.060354] system 00:06: [io  0x2000-0x207f] has been reserved
[    0.060359] system 00:06: [io  0x2080-0x20ff] has been reserved
[    0.060364] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.060368] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.060373] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[    0.060378] system 00:06: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.060383] system 00:06: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.060387] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.060393] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.060556] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.060561] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.060566] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.060676] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.060975] pnp 00:09: [dma 0 disabled]
[    0.061091] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.061237] system 00:0a: [io  0x0290-0x029f] has been reserved
[    0.061242] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.061367] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.061372] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.061724] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.061730] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.061734] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.061739] system 00:0c: [mem 0x00100000-0x3fffffff] could not be reserved
[    0.061744] system 00:0c: [mem 0xff380000-0xffffffff] has been reserved
[    0.061749] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.062198] pnp: PnP ACPI: found 13 devices
[    0.062201] ACPI: bus type PNP unregistered
[    0.062206] PnPBIOS: Disabled by ACPI PNP
[    0.100180] Switched to clocksource acpi_pm
[    0.100218] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.100228] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.100235] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.100242] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.100250] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.100255] pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
[    0.100259] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.100263] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
[    0.100267] pci_bus 0000:01: resource 5 [mem 0x40000000-0xffffffff]
[    0.100271] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.100318] NET: Registered protocol family 2
[    0.100514] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.100545] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.100594] TCP: Hash tables configured (established 8192 bind 8192)
[    0.100646] TCP: reno registered
[    0.100650] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.100664] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.100736] NET: Registered protocol family 1
[    0.101086] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.575404] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.575561] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.575613] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.575677] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.575737] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.575803] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.575873] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.575948] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.575958] pci 0000:00:0d.0: Boot video device
[    0.575969] PCI: CLS 64 bytes, default 64
[    0.576232] Unpacking initramfs...
[    0.724761] Freeing initrd memory: 736K (f7746000 - f77fe000)
[    0.725455] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.725833] bounce pool size: 64 pages
[    0.729657] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.729800] fuse init (API version 7.23)
[    0.729971] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.730754] aufs 3.x-rcN-20140609
[    0.730762] msgmni has been set to 1746
[    0.731073] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.731077] io scheduler noop registered
[    0.731079] io scheduler deadline registered (default)
[    0.731226] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.731336] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    0.731430] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    0.731582] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[    0.731587] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[    0.731612] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    0.731617] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    0.731640] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    0.731645] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    0.731661] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.731703] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.731908] simple-framebuffer simple-framebuffer.0: framebuffer at 0xc0000000, 0xeb000 bytes, mapped to 0xf8080000
[    0.731913] simple-framebuffer simple-framebuffer.0: format=r5g6b5, mode=800x600x16, linelength=1600
[    0.738386] Console: switching to colour frame buffer device 100x37
[    0.744619] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.744830] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.744835] ACPI: Power Button [PWRB]
[    0.744954] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.744958] ACPI: Power Button [PWRF]
[    0.745143] isapnp: Scanning for PnP cards...
[    1.101057] isapnp: No Plug & Play device found
[    1.101237] Linux agpgart interface v0.103
[    1.101262] [drm] Initialized drm 1.1.0 20060810
[    1.102577] loop: module loaded
[    1.103166] sata_nv 0000:00:08.0: version 3.5
[    1.103475] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    1.104279] scsi0 : sata_nv
[    1.104487] scsi1 : sata_nv
[    1.104579] ata1: SATA max UDMA/133 cmd 0xe00 ctl 0xe20 bmdma 0xd880 irq 21
[    1.104583] ata2: SATA max UDMA/133 cmd 0xe40 ctl 0xe60 bmdma 0xd888 irq 21
[    1.104866] pata_amd 0000:00:06.0: version 0.4.1
[    1.106430] scsi2 : pata_amd
[    1.106621] scsi3 : pata_amd
[    1.106705] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.106709] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.107934] Fusion MPT base driver 3.04.20
[    1.107938] Copyright (c) 1999-2008 LSI Corporation
[    1.107951] Fusion MPT SPI Host driver 3.04.20
[    1.107984] Fusion MPT SAS Host driver 3.04.20
[    1.108101] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.108104] ehci-pci: EHCI PCI platform driver
[    1.108288] ehci-pci 0000:00:02.1: EHCI Host Controller
[    1.108299] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.108312] ehci-pci 0000:00:02.1: debug port 1
[    1.108343] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    1.108375] ehci-pci 0000:00:02.1: irq 22, io mem 0xdfffec00
[    1.114028] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.114381] hub 1-0:1.0: USB hub found
[    1.114397] hub 1-0:1.0: 8 ports detected
[    1.114743] ehci-platform: EHCI generic platform driver
[    1.114766] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.114775] ohci-pci: OHCI PCI platform driver
[    1.114943] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    1.114954] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.115048] ohci-pci 0000:00:02.0: irq 23, io mem 0xdffff000
[    1.168312] hub 2-0:1.0: USB hub found
[    1.168325] hub 2-0:1.0: 8 ports detected
[    1.168647] ohci-platform: OHCI generic platform driver
[    1.168670] uhci_hcd: USB Universal Host Controller Interface driver
[    1.168793] usbcore: registered new interface driver usb-storage
[    1.168814] usbcore: registered new interface driver ums-alauda
[    1.168835] usbcore: registered new interface driver ums-cypress
[    1.168856] usbcore: registered new interface driver ums-datafab
[    1.168877] usbcore: registered new interface driver ums-freecom
[    1.168899] usbcore: registered new interface driver ums-isd200
[    1.168920] usbcore: registered new interface driver ums-jumpshot
[    1.168941] usbcore: registered new interface driver ums-karma
[    1.168964] usbcore: registered new interface driver ums-onetouch
[    1.168996] usbcore: registered new interface driver ums-realtek
[    1.169051] usbcore: registered new interface driver ums-sddr09
[    1.169073] usbcore: registered new interface driver ums-sddr55
[    1.169094] usbcore: registered new interface driver ums-usbat
[    1.169175] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.169178] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.169926] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.170149] mousedev: PS/2 mouse device common for all mice
[    1.170489] rtc_cmos 00:01: RTC can wake from S4
[    1.170699] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.170743] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram
[    1.170769] IR Sharp protocol handler initialized
[    1.170811] platform eisa.0: Probing EISA bus 0
[    1.170816] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.170820] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.170825] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.170829] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.170833] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.170837] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.170841] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.170845] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.170850] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.170853] platform eisa.0: EISA: Detected 0 cards
[    1.170875] sdhci: Secure Digital Host Controller Interface driver
[    1.170877] sdhci: Copyright(c) Pierre Ossman
[    1.170943] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    1.170945] wbsd: Copyright(c) Pierre Ossman
[    1.171062] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    1.171266] usbcore: registered new interface driver vub300
[    1.171509] hidraw: raw HID events driver (C) Jiri Kosina
[    1.171565] usbcore: registered new interface driver usbhid
[    1.171567] usbhid: USB HID core driver
[    1.171718] TCP: cubic registered
[    1.171722] NET: Registered protocol family 17
[    1.171980] Using IPI No-Shortcut mode
[    1.172170] registered taskstats version 1
[    1.172722] rtc_cmos 00:01: setting system clock to 2014-06-14 15:41:35 UTC (1402760495)
[    1.172738] ALSA device list:
[    1.172740]   No soundcards found.
[    1.196415] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.348294] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL01, max UDMA/66
[    1.348528] ata3.01: ATA-6: ST3160021A, 8.01, max UDMA/100
[    1.348532] ata3.01: 312581808 sectors, multi 16: LBA48
[    1.348542] ata3: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c60000) ACPI=0x1f01f (30:20:0x15)
[    1.348549] ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc5c60000) ACPI=0x3f01f (30:20:0x15)
[    1.354243] ata3.00: configured for UDMA/66
[    1.360420] ata3.01: configured for UDMA/100
[    1.419655] ata1: SATA link down (SStatus 0 SControl 300)
[    1.470034] usb 1-5: new high-speed USB device number 3 using ehci-pci
[    1.641027] usb 1-6: new high-speed USB device number 4 using ehci-pci
[    1.743400] ata2: SATA link down (SStatus 0 SControl 300)
[    1.757384] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H42N  RL01 PQ: 0 ANSI: 5
[    1.757520] usb-storage 1-6:1.0: USB Mass Storage device detected
[    1.757645] scsi4 : usb-storage 1-6:1.0
[    1.785699] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.785703] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.785918] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.787868] scsi 2:0:1:0: Direct-Access     ATA      ST3160021A       8.01 PQ: 0 ANSI: 5
[    1.788229] sd 2:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.788301] sd 2:0:1:0: [sda] Write Protect is off
[    1.788306] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.788337] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.788643] ata4: port disabled--ignoring
[    1.793441]  sda: sda1
[    1.793832] sd 2:0:1:0: [sda] Attached SCSI disk
[    1.794250] Freeing unused kernel memory: 504K (c1586000 - c1604000)
[    1.859043] usb 1-7: new high-speed USB device number 5 using ehci-pci
[    2.753082] usb 2-3: new low-speed USB device number 2 using ohci-pci
[    2.760802] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    2.762804] scsi 4:0:0:1: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    2.765310] scsi 4:0:0:2: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    2.767300] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    2.769916] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[    2.771300] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[    2.956706] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:046D:C03D.0001/input/input3
[    2.957107] hid-generic 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3/input0
[    3.218067] usb 2-5: new full-speed USB device number 3 using ohci-pci
[    3.597453] random: nonblocking pool is initialized
[    3.685051] usb 2-7: new full-speed USB device number 4 using ohci-pci
[    3.863046] usb 2-7: not running at top speed; connect to a high speed hub
[    3.884216] usb-storage 2-7:1.0: USB Mass Storage device detected
[    3.885723] scsi5 : usb-storage 2-7:1.0
[    4.146055] usb 2-8: new full-speed USB device number 5 using ohci-pci
[    4.311050] usb 2-8: device descriptor read/64, error -62
[    4.577054] usb 2-8: device descriptor read/64, error -62
[    4.835051] usb 2-8: new full-speed USB device number 6 using ohci-pci
[    4.897077] scsi 5:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[    4.908062] sd 5:0:0:0: [sde] 15356160 512-byte logical blocks: (7.86 GB/7.32 GiB)
[    4.915063] sd 5:0:0:0: [sde] Write Protect is off
[    4.915071] sd 5:0:0:0: [sde] Mode Sense: 23 00 00 00
[    4.922069] sd 5:0:0:0: [sde] No Caching mode page found
[    4.922076] sd 5:0:0:0: [sde] Assuming drive cache: write through
[    4.972110]  sde: sde1
[    5.000038] usb 2-8: device descriptor read/64, error -62
[    5.001098] sd 5:0:0:0: [sde] Attached SCSI removable disk
[    5.266034] usb 2-8: device descriptor read/64, error -62
[    5.524028] usb 2-8: new full-speed USB device number 7 using ohci-pci
[    5.930024] usb 2-8: device not accepting address 7, error -62
[    6.097054] usb 2-8: new full-speed USB device number 8 using ohci-pci
[    6.526028] usb 2-8: device not accepting address 8, error -62
[    6.526058] hub 2-0:1.0: unable to enumerate USB device on port 8
[    7.009673] udevd[1260]: starting version 182
[  106.037428] usb 2-5: USB disconnect, device number 3
[  107.680033] usb 1-5: new high-speed USB device number 7 using ehci-pci
[  108.114028] usb 2-5: new full-speed USB device number 9 using ohci-pci
wifislax ~ #
 ??? ??? ???
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 19:02 (Sábado)
@fifoko

¿ en versiones anteriores de wifislax te funcionaba dicha tarjeta ?


estoy por recuperar mi vieja config y desde hay tratar de arreglar lo de raton/teclado.
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: fifoko en 14-06-2014, 19:14 (Sábado)
tengo el 4.7,y el 4.8 y van perfectooo por eso te digo que el 4.9 no se porque me da fallos,lo del raton y teclado a mi se me soluciono ,el problema es la red
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 20:09 (Sábado)
tengo el 4.7,y el 4.8 y van perfectooo por eso te digo que el 4.9 no se porque me da fallos,lo del raton y teclado a mi se me soluciono ,el problema es la red

osea 4.7 y 4.8 perfect todo ...
4.9 , raton y teclado  K.O


ok , regreso a mi vieja config ,que tras tanto tiempo estaba bastante pulida , y ya de hay trato de reparar raton/teclado.


VOY A INTENTAR ACOTAR , primero el de mouse ...  asi por lo menos aunque no te funcionase el teclado, podrias con el raton arrancar uno de los teclados virtuales ,para poder hacer pruebas.

hasta mañana me temo que ya nada ...gracias a todos.
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: fifoko en 14-06-2014, 20:26 (Sábado)
 ;D 4.7 y 4.8 perfecto los dos,4.9 me fallava el raton y el teclado y con el ke subiste ayer se me soluciono teclado y raton y no me detectaba la tarejta,y con este iwal,
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 20:30 (Sábado)
si es que ya se sabe ...

"si funciona no lo toques"  ....  "pa que tocas" ...   ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D



¿ crees que serias capaz de sustituir tu mismo el kernel ? , me refiero a subir yo , uno y cambiarlo tu mismo ..es muy muy facil.


subiria un fichero  *.zip   , y dentro estarian un xzm "000-kernel..", y un fichero vmlinuz


seria dar el cambiazo ... ficheros viejos por nuevos ...


boot -->> vmlinuz  , sobreescribiendo el que hay que no te funciona bien
wifislax/base  -->> 000-kernel  ...   sobreescribiendo el que existe y no te funciona.


solo seria eso , cambiar esos dos files ...si te atreves , en una media hora te posteo uno nuevo.

 ;)
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: fifoko en 14-06-2014, 20:40 (Sábado)
puesto a probar se puede probar aver si soms capaces de cambiarlo,vale subelo y me explicas mas o menos lo que tengo que hacer,gracias
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 21:51 (Sábado)
se esta subiendo ya....

en unos 5 minutillos esta...


es facil ...

bajais el fichero zip  ... extraeis el contenido del zip


y vereis dos carpetas

boot
wifislax


copiadlas al pendrive y "sobreescribir" , los ficheros que teniais antes....et voila.

 ;D


Creo que va a ser un acierto seguro ... me he bajao la 4.8  ,  he cogido la config ... y simplemente he configurado los parametros nuevos del 3.15 , ....asi que debe estar todo en su sitio a la primera.


como se suele decir, a veces hay que dar un paso atras ,para poder dar dos pasos hacia adelante.
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 22:01 (Sábado)
ale, hay va...


de momento solo he hecho el kernel normal, asi que cuando vayais a probarlo , elegid "kernel normal" ..


nueva-config.zip (34 MB)   http://www.multiupload.nl/FOM4CDOFEJ
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: fifoko en 14-06-2014, 22:14 (Sábado)
como se descarga de esa pagina???
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 22:22 (Sábado)
que cabrones , ....     voy a subirlo a otro sitio , hij0s de perra.  ^-^

te redirigen a descargar lo que les da la **** gana.
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: fifoko en 14-06-2014, 22:27 (Sábado)
 ;D ;D ;D vale a la espera estoy
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 22:37 (Sábado)
desde mediafire ....  boton verde.


http://www.mediafire.com/download/ryreg8f0yv1ea35/nueva-config.zip
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: fifoko en 14-06-2014, 22:39 (Sábado)
este ya es mas famoso jajaja se entiende mejor,le voy a pega el cambiazo a eso ahora te digo algo
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 22:46 (Sábado)
este ya es mas famoso jajaja se entiende mejor,le voy a pega el cambiazo a eso ahora te digo algo

ok , gracias.

si funciona bien ,hago el pae tambien  y subo los dos en un zip ...

tendras una version de la 4.9 , mas actualizada que la oficial  ;D ;D ;D ;D
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: fifoko en 14-06-2014, 23:06 (Sábado)
pues va ser que no se quieren solucionar los problemas,sobreescribi los archivos y todo bien asta que inicio,otra vez problemas de teclado y raton
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 23:09 (Sábado)
pues va ser que no se quieren solucionar los problemas,sobreescribi los archivos y todo bien asta que inicio,otra vez problemas de teclado y raton

ni teclado ni raton..   ???

joerrr....
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: fifoko en 14-06-2014, 23:15 (Sábado)
va ser que no...voy aser lo mismo con la version 4.7le voy a sobreescribi aver...
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 23:16 (Sábado)
ok ,  son por usb ?? las conexiones de teclado/raton  o son ps2  ... o es un portatil ??
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: fifoko en 14-06-2014, 23:20 (Sábado)
la de raton es por usb,teclado no,es sobremesa
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 14-06-2014, 23:25 (Sábado)
la de raton es por usb,teclado no,es sobremesa

el teclado entonces es de los de conector redondo .. ?

estas seguro que no funciona ?

en kde si pulsas la tecla  imp pant  , se abriria el capturador de pantalla si es que funcionase.


si al pulsar esa tecla en kde no se iniicia la aplicacion es que realmente no va el teclado tampoco.
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: fifoko en 14-06-2014, 23:29 (Sábado)
asunto resuelto compañero...
e sobreescrito los archivos de otra iso ke tenia x aki i ya me funcionan el teclado,raton y la tarjeta de red
le e puesto el del 4.7 creo ke es
000-Kernel-3.13-i486-1sw.xzm

 ;D ;D ;D
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 15-06-2014, 00:05 (Domingo)
esta claro que lo que te sucede a ti en concreto , es algun tipo de problema con los usb ...


voy a intentar una ultima config para el 3.15 ...
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: pepe10000 en 15-06-2014, 08:21 (Domingo)
desde mediafire ....  boton verde.


http://www.mediafire.com/download/ryreg8f0yv1ea35/nueva-config.zip

Con la nueva configuración todo O.K. en el portátil Pavilion DV5.
El mando a distancia vuelve a funcionar como siempre.
Y el resto lo he mirado por encima y parece que todo está bien.

Si necesitas mas pruebas solo tienes que decirlo.

Un saludo.
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: epidemya en 08-07-2014, 20:31 (Martes)
Hola
Yo también soy un afectado por el tema del teclado, a mi el ratón (touch) me funciona. Realmente es un portátil.
He descargado la 4.9 oficial y sigue con el problema. Al intentar descargar la version

http://www.downloadwireless.net/isos-fase-testing/wifislax-current/wifislax-4.9-14062014.iso

MD5 -->> 52b178df5984aa2e7b95ff8c32be7ee2

me lleva al servidor pero no la puedo elegir, no la veo... que hago mal

Saludos
Título: Re: ISO kernel 3.15 nueva config TESTEO 2
Publicado por: USUARIONUEVO en 08-07-2014, 23:51 (Martes)
Hola
Yo también soy un afectado por el tema del teclado, a mi el ratón (touch) me funciona. Realmente es un portátil.
He descargado la 4.9 oficial y sigue con el problema. Al intentar descargar la version

http://www.downloadwireless.net/isos-fase-testing/wifislax-current/wifislax-4.9-14062014.iso

MD5 -->> 52b178df5984aa2e7b95ff8c32be7ee2

me lleva al servidor pero no la puedo elegir, no la veo... que hago mal

Saludos

el fichero fue eliminado.