Seguridad Wireless - Wifi
Suite Seguridad Wireless => Colaboracion y desarrollo de nuestras lives => Mensaje iniciado por: cLn en 29-09-2013, 16:56 (Domingo)
-
Hola...
No sé si ya está posteada esta herramienta...pero resulta interesante para incluirla en la live...
Wifi has three main menus :
Cracking menu: contains attacks that could allow us to crack wifi passwords weather is WEP , WPA or WPA2:
Enable monitor mode
View avalale Wireless Networks
Launch Airodump-ng on a specific AP
WEP cracking: here you can perform a number of attacks to crack WEP passwords :
Interactive packet replay.
Fake Authentication Attack.
Korek Chopchop Attack.
Fragmentation Attack.
Hirte Attack (cfrag attack).
Wesside-ng.
WPA Cracking: here you can perform a number of attacks to crack WPA passwords , this menu is devided into two sections:
launch a brute force attack against a WPS-enabled network to crack WPA/WPA2 without a dictionary.
Obtain handshake: This will automatically attempt to obtain the handshake
Cracking: After obtaining the handshake or if you have the handshake ready then you can attempt to crack it in this section , you can choose to use you wordlist straight away with aircrack-ng or you can add to a table and then crack the password.
MITM: this menu will allow you to do the following Automatically:
Enable IP forwarding.
ARP Spoof.
Launch ettercap (Text mode).
Sniff SSL/HTTPS traffic.
Sniff URLs and send them to browser.
Sniff images.
DNS Spoof.
HTTP Session Hijacking (using Hamster).
Others: this menu will allow you to o the following automatically:
Change MAC Address.
Create a fake access point.
Hijack software updates (using Evilgrade).
Platforms supported:
Wi-fEye is written in Python and should run on any UNIX based platform with a Python interpreter, as long as all needed modules and programs have been installed. So far it has been successfully tested on:
Linux
FreeBSD
Download:
http://wi-feye.za1d.com/download.php
Saludos !!
-
gracias, en cuanto pueda prueba esta y la otra que propones.
-
creo que usa: dhcp3 ???
wifislax Wi-fEye # python Wi-fEye.py
Wi-fEye
version: 0.5.7
I can SEEE you !!
Written by Zaid Al-Quraishi (IG)
zaid@isecur1ty.org
wi-feye.za1d.com
Network interfaces:
1. wlan0
2. mon0
3. mon1
Select your network interface
wi-fEye >> 2
Main menus:
1. Cracking
2. MITM
3. Others
0. Exit
Wi-fEye >> 3
1. Change MAC Address
2. Make a fake access point
3. Hijack software updates
0. Back
Wi-fEye >> Others >> 2
AP name: joker
- Starting AP on channel 6 and ESSIDjoker
Enter name of card connected to the internet (hit enter if you don't want to enable internet on the fake AP)
Interface: eth0
/bin/sh: /var/lib/dhcp3/dhcpd.leases: No existe el fichero o el directorio
/bin/sh: dhcpd3: no se encontró la orden
mv: no se puede efectuar `stat' sobre «/etc//dhcpd.original.conf»: No existe el fichero o el directorio
- Disabling monitor mode on mon0...
- Monitor Mode disabled on mon0
- Switching back to mon0
1. Change MAC Address
2. Make a fake access point
3. Hijack software updates
0. Back
Wi-fEye >> Others >>
http://www.mediafire.com/download/q3cr5507qhn4f5h/Wi-fEye-v1.0.xzm
saludos :P
upss me equivoque en el lanzador, mejor:
cd /opt/Wi-fEye/
python Wi-fEye.py
-
10 megas es un palo enorme... :P
-
10 megas es un palo enorme... :P
El problema es que no lo limpie, solo instale las dependencias que pedía, el que pesa mas es el evilgrade (como 95 % y que a las ultimas no funciono je je je), creo que mejor le dejo a los que saben.
Saludos
-
el evilgrade yo lo hice funcionar..necesita librerias extra de perl.
pero aun despues, lo estoy probando y no se muy bien por que piden este script.. ¿ que tiene este que no tengan los demas ?
-
este script peta...POR no hablar de que ni desmonta las interfaces monitor ni nada de nada.
solo pude hacer funcionar el modo crack-wep .... :-\
(http://imageshack.us/a/img571/6100/nvp3.png)
-
este script peta...POR no hablar de que ni desmonta las interfaces monitor ni nada de nada.
solo pude hacer funcionar el modo crack-wep .... :-\
(http://imageshack.us/a/img571/6100/nvp3.png)
ese error me salia y lo solucionaba con:
cd /opt/Wi-fEye/
python Wi-fEye.py