Seguridad Wireless - Wifi
Equipos y materiales => Tarjetas de Red Wireless => Adaptadores wireless USB => Mensaje iniciado por: Tux Tux en 07-10-2011, 14:43 (Viernes)
-
Buenas, alguien sabria decirme si esta tarjeta es compatible con Wifiway? Perdon por la ignorancia pero son tarjetas normales y corrientes para conectarse a internet, no?
-
http://www.alfa.com.tw/in/front/bin/ptdetail.phtml?Part=UBDo-gt5&Category=106473
Release Date: 2006-02-09, ver 1.2
RTL8187 Linux driver version 1.2
--This driver supports RealTek RTL8187 Wireless LAN driver for
Fedora Core 2/3/4/5, Debian 3.1, Mandrake 10.2/Mandriva 2006,
SUSE 9.3/10.1/10.2, Gentoo 3.1, etc.
- Support Client mode for either infrastructure or adhoc mode
- Support WEP and WPAPSK connection
< Component >
The driver is composed of several parts:
1. Module source code
stack.tar.gz
drv.tar.gz
2. Script ot build the modules
makedrv
3. Script to load/unload modules
wlan0up
wlan0down
4. Script and configuration for DHCP
wlan0dhcp
ifcfg-wlan0
4. Supplicant source code:
wpa_supplicant-0.4.9.tar.gz
5. Example of supplicant configuration file:
wpa1.conf
< Installation >
Runing the scripts can finish all operations of building up modules
from the source code and start the nic.
1. Build up the drivers from the source code
./makedrv
2. load the driver module to kernel and start up nic
./wlan0up
< Set wireless lan MIBs >
This driver uses Wireless Extension as an interface allowing you to set
Wireless LAN specific parameters.
Current driver supports "iwlist" to show the device status of nic
iwlist wlan0 [parameters]
where
parameter explaination [parameters]
----------------------- -------------
Show available chan and freq freq / channel
Show and Scan BSS and IBSS scan[ning]
Show supported bit-rate rate / bit[rate]
Show Power Management mode power
For example:
iwlist wlan0 channel
iwlist wlan0 scan
iwlist wlan0 rate
iwlist wlan0 power
Driver also supports "iwconfig", manipulate driver private ioctls, to set
MIBs.
iwconfig wlan0 [parameters] [val]
where
parameter explaination [parameters] [val] constraints
----------------------- ------------- ------------------
Connect to AP by address ap [mac_addr]
Set the essid, join (I)BSS essid [essid]
Set operation mode mode {Managed|Ad-hoc}
Set keys and security mode key/enc[ryption] {N|open|restricted|off}
For example:
iwconfig wlan0 ap XX:XX:XX:XX:XX:XX
iwconfig wlan0 essid "ap_name"
iwconfig wlan0 mode Ad-hoc
iwconfig wlan0 mode essid "name" mode Ad-hoc
iwconfig wlan0 key 0123456789 [2] open
iwconfig wlan0 key off
iwconfig wlan0 key restricted [3] 0123456789
< Getting IP address >
After start up the nic, the network needs to obtain an IP address before
transmit/receive data.
This can be done by setting the static IP via "ifconfig wlan0 IP_ADDRESS"
command, or using DHCP.
If using DHCP, setting steps is as below:
(1)connect to an AP via "iwconfig" settings
iwconfig wlan0 essid [name] or
iwconfig wlan0 ap XX:XX:XX:XX:XX:XX
(2)run the script which run the dhclient
./wlan0dhcp
or
dhcpcd wlan0
(Some network admins require that you use the
hostname and domainname provided by the DHCP server.
In that case, use
dhcpcd -HD wlan0)
< WPAPSK >
WPA_SUPPLICANT help the network to communicate under the protection of WPAPSK
mechanism
(1)Unpack source code of WPA supplicant:
tar -zxvf wpa_supplicant-0.4.9.tar.gz
cd wpa_supplicant-0.4.9
(2)Create .config file:
cp defconfig .config
-
Muchas gracias, pero yo no se de datos tecnicos, eso ya lo he visto en la pagina... queria un si o un no, era mas facil, pero gracias aun asi.
-
Si lo hubieses visto no hubieses preguntado
Me he molestado en descargar el archivo "linux kernel 2.6.X" para ver lo que hay dentro y
te lo he pegado aquí , no has visto nada por que no pone nada referente al chip , a no ser que descargues
dicho archivo.
Gracias por nada.
-
La ultima coletilla creo que sobraba, por que he sido agradecido aun no habiendome dado lo que necesitaba, pero solo por haber contestado te agradecí, añadiendo que no entiendo esos datos, en la pagina tambien pone caracteristicas tecnicas, pero por mas que ponga no sé lo que he preguntado, un saludo y gracias de nuevo.
-
por que he sido agradecido aun no habiendome dado lo que necesitaba
A si ¿?que bien . Tu lo que necesitas es ............
pero por mas que ponga no sé lo que he preguntado
ya me queda aun mas claro.
Tema cerrado