Saludos , surfeando por ahi me encontre otro manual, pues el proceso de git core git es muy lento
aqui hay otra solucion ademas con el git al querer inyectar te sale siempre en un canal fijo
Finally an easy way to get this awus036NH working. Took a while, but all is working amazingly well. Despite not being a difficult operation, downloading rt2x00 branch from popipo is extremely slow, and so is compiling the kernel. Jusic at
http://wardriving-forum.de posted a precompiled kernel under in the form of a .deb package, time-saving indeed. Alright let's do this:
1. Download the precompiled kernel image and headers from here:
http://rapidshare.com/users/5XTL4C2. If they were downloaded to your ~/Downloads folder do the following:
cd ~/Download && sudo mv linux-image-2.6.33-wl_rt3070_i386.deb /usr/src && sudo mv linux-headers-2.6.33-wl_rt3070_i386.deb
3. cd /usr/src
4. sudo dpkg -i linux-image-2.6.33-wl_rt3070_i386.deb
5. sudo dpkg -i linux-headers-2.6.33-wl_rt3070_i386.deb
6. update-initramfs-k 2.6.33-wl-c
7. update-grub
8. go here:
http://www.ralinktech.com/support.php?s=2 and download the following file: Firmware RT28XX/RT30XX USB series (RT2870/RT2770/RT3572/RT3070)
9. Again, assuming the file you just downloaded is in your downloads folder type the following: cd ~/Downloads && sudo mv rt2870.bin /lib/firmware
10. Finally edit the following file: sudo nano /etc/init.d/blacklist (or blacklist.conf depending on distro) and add blacklist rt2870sta at the end of the file press ctrl-x to exit nano and reboot
11. When you reboot, make sure to choose the kernel you just installed (2.6.33-wl) when grub prompts you to choose which kernel it should boot.
12. Finally, make sure networking is activated and type the following: sudo modprobe rt2800usb
13. airmon-ng start wlan0 && aireplay-ng -9 mon0 to try out your now working alfa beast.
cheers, hope it helps.