?>/script>'; } ?> wifislax-4.1-beta-2 [pruebas broadcom y testing] Widgets Magazine
« anterior próximo »
Páginas: [1] 2 3 4   Ir Abajo

Autor Tema: wifislax-4.1-beta-2 [pruebas broadcom y testing]  (Leído 57042 veces)

0 Usuarios y 1 Visitante están viendo este tema.

Conectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 15985
wifislax-4.1-beta-2 [pruebas broadcom y testing]
« en: 14-04-2012, 07:48 (Sábado) »
bueno , pues vamos alla con la prueba 2

http://www.downloadwireless.net/isos-fase-testing/wifislax-4.1/wifislax-4.1-beta-2.iso

añadirle ademas para las broadcom

http://downloadwireless.net/modulos-fase-testing/wifislax-4.1/firmwares-broadcom.xzm

los cambios con respecto a wifislax 4.0 son:

Código: [Seleccionar]
* changelog wifislax 4.1

-movida libreria binutils a modulo core para que ark pueda abrir ficheros .deb sin el devel
-actualizado kernel a version 3.3.0 (drivers android compilados)
-añadido soporte para particiones EXT4
-retocado menu-config por tema office que no se mostraba la categoria
-añadido rpm2xzm
-actualizados firmwares broadcom y añadido alguno mas
-añadido b43-fwcutter-015
-actualizado libtheora a 1.1.1
-reconfigurado record my desktop para libtheora 1.1.1
-añadida jack-audio-connection-kit-0.121.3-i486-1sl
-añadido kpackage-3.5.9-2
-fix knemo en autostart-actualizada suite aircrack-ng a revision r2150
-añadido wifite 2 con soporte wps beta 9


-----06-04-2012---------
-actualizado kernel a version 3.3.1
-actualizado wireshark a version 1.6.6




----14-04-2012------
-actualizado kernel a version 3.3.2
-actualizado wireshark a version 1.6.7
-actualizado flashplayer a version 11.2-r202
-actualizado iw a version 3.4
-añadido aircrack-ng auto-updater
« Última modificación: 15-04-2012, 00:32 (Domingo) por USUARIONUEVO »
En línea

Conectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 15985
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #1 en: 14-04-2012, 07:51 (Sábado) »
pequeño recordatorio ....

1-arrancar y comprobar si aparece....
en caso negativo , deberemos ir probando a montar y desmontar drivers ...hasta que aparezca.


desmiontar =  rmmod
montar = modprobe

nombre de los drivers a probar

b43
brcmsmac


posiblemente el sistema intente usar primero el b43 ... y ojala al estar el otro ( brcmsmac que antes no estaba ) , ya si funcione todo bien, por que ese, es el que da soporte a los chips n.

de no ser asi..

rmmod b43
modprobe brcmsmac


cuando hagais pruebas de montar un driver y desmontar otro , ir mirando con

iwconfig

si no aparece ., seguid con los cambios de drivers.

yo espero que aparezac sin hacer nada , pero ya se vera que pasa.
En línea

inguaite

  • Visitante
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #2 en: 14-04-2012, 22:24 (Sábado) »
Cita de: USUARIONUEVO en 14-04-2012, 07:51 (Sábado)
yo espero que aparezac sin hacer nada , pero ya se vera que pasa.

Descargada, primer inicio sin ningún aditamento ni la Alfa

Código: [Seleccionar]
wifislax ~ # iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wifislax ~ # modprobe b43

wifislax ~ # iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wifislax ~ # rmmod b43

wifislax ~ # modprobe brcmsmac

wifislax ~ # iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wifislax ~ #
Se hace la dificil...   ;D ;D
En línea

Conectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 15985
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #3 en: 14-04-2012, 22:33 (Sábado) »
despues de cada intenta , mira de hacer

Código: [Seleccionar]
dmesg
para ver de que se queja...

estoy me esta desmoralizando ya... :'(
En línea

Conectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 15985
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #4 en: 14-04-2012, 22:43 (Sábado) »
recien arrancado el sistema, ...puedes copiarme el contenido de hacer


lsmod



lsmod = lista de drivers que carga el sistema.
En línea

inguaite

  • Visitante
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #5 en: 14-04-2012, 22:48 (Sábado) »
b43

[spoiler]
Código: [Seleccionar]
wifislax ~ # dmesg
:02: [io  0xfe00-0xfefe] has been reserved
[    0.147685] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.147802] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.147920] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.148053] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.148170] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.148286] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.148404] system 00:02: [mem 0xffe00000-0xffffffff] has been reserved
[    0.148521] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.148604] pnp 00:03: [irq 12]
[    0.148698] pnp 00:03: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.148750] pnp 00:04: [io  0x0060]
[    0.148755] pnp 00:04: [io  0x0064]
[    0.148772] pnp 00:04: [irq 1]
[    0.148867] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.148900] pnp 00:05: [dma 4]
[    0.148904] pnp 00:05: [io  0x0000-0x000f]
[    0.148908] pnp 00:05: [io  0x0081-0x0083]
[    0.148912] pnp 00:05: [io  0x0087]
[    0.148915] pnp 00:05: [io  0x0089-0x008b]
[    0.148918] pnp 00:05: [io  0x008f]
[    0.148922] pnp 00:05: [io  0x00c0-0x00df]
[    0.149016] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.149035] pnp 00:06: [io  0x0070-0x0071]
[    0.149045] pnp 00:06: [irq 8]
[    0.149153] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.149197] pnp 00:07: [io  0x0061]
[    0.149390] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.149664] pnp 00:08: [io  0x0010-0x001f]
[    0.149668] pnp 00:08: [io  0x0022-0x003f]
[    0.149672] pnp 00:08: [io  0x0062-0x0063]
[    0.149675] pnp 00:08: [io  0x0065-0x006f]
[    0.149679] pnp 00:08: [io  0x0072-0x007f]
[    0.149682] pnp 00:08: [io  0x0080]
[    0.149686] pnp 00:08: [io  0x0084-0x0086]
[    0.149689] pnp 00:08: [io  0x0088]
[    0.149692] pnp 00:08: [io  0x008c-0x008e]
[    0.149696] pnp 00:08: [io  0x0090-0x009f]
[    0.149699] pnp 00:08: [io  0x00a2-0x00bf]
[    0.149703] pnp 00:08: [io  0x00b1]
[    0.149706] pnp 00:08: [io  0x00e0-0x00ef]
[    0.149709] pnp 00:08: [io  0x04d0-0x04d1]
[    0.149713] pnp 00:08: [io  0x040b]
[    0.149716] pnp 00:08: [io  0x04d6]
[    0.149719] pnp 00:08: [io  0x0c00-0x0c01]
[    0.149722] pnp 00:08: [io  0x0c14]
[    0.149726] pnp 00:08: [io  0x0c50-0x0c51]
[    0.149729] pnp 00:08: [io  0x0c52]
[    0.149732] pnp 00:08: [io  0x0c6c]
[    0.149735] pnp 00:08: [io  0x0c6f]
[    0.149739] pnp 00:08: [io  0x0cd0-0x0cd1]
[    0.149742] pnp 00:08: [io  0x0cd2-0x0cd3]
[    0.149746] pnp 00:08: [io  0x0cd4-0x0cd5]
[    0.149749] pnp 00:08: [io  0x0cd6-0x0cd7]
[    0.149752] pnp 00:08: [io  0x0cd8-0x0cdf]
[    0.149756] pnp 00:08: [io  0x0b00-0x0b3f]
[    0.149759] pnp 00:08: [io  0x0800-0x089f]
[    0.149763] pnp 00:08: [io  0x0000-0xffffffff disabled]
[    0.149767] pnp 00:08: [io  0x0b00-0x0b0f]
[    0.149770] pnp 00:08: [io  0x0b20-0x0b3f]
[    0.149773] pnp 00:08: [io  0x0900-0x090f]
[    0.149777] pnp 00:08: [io  0x0910-0x091f]
[    0.149780] pnp 00:08: [io  0xfe00-0xfefe]
[    0.149784] pnp 00:08: [io  0x0060-0x005f disabled]
[    0.149788] pnp 00:08: [io  0x0064-0x0063 disabled]
[    0.149792] pnp 00:08: [mem 0x00000000-0xffffffff disabled]
[    0.149796] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[    0.149799] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[    0.149803] pnp 00:08: [mem 0xfed40000-0xfed44fff]
[    0.149807] pnp 00:08: [mem 0xfed80000-0xfed80fff]
[    0.149810] pnp 00:08: [mem 0x00000000-0xffffffff disabled]
[    0.150037] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.150162] system 00:08: [io  0x040b] has been reserved
[    0.150276] system 00:08: [io  0x04d6] has been reserved
[    0.150392] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.150506] system 00:08: [io  0x0c14] has been reserved
[    0.150621] system 00:08: [io  0x0c50-0x0c51] has been reserved
[    0.150732] system 00:08: [io  0x0c52] has been reserved
[    0.150846] system 00:08: [io  0x0c6c] has been reserved
[    0.150958] system 00:08: [io  0x0c6f] has been reserved
[    0.151098] system 00:08: [io  0x0cd0-0x0cd1] has been reserved
[    0.151212] system 00:08: [io  0x0cd2-0x0cd3] has been reserved
[    0.151325] system 00:08: [io  0x0cd4-0x0cd5] has been reserved
[    0.151438] system 00:08: [io  0x0cd6-0x0cd7] has been reserved
[    0.151551] system 00:08: [io  0x0cd8-0x0cdf] has been reserved
[    0.151664] system 00:08: [io  0x0b00-0x0b3f] could not be reserved
[    0.151778] system 00:08: [io  0x0800-0x089f] has been reserved
[    0.151892] system 00:08: [io  0x0b00-0x0b0f] has been reserved
[    0.152018] system 00:08: [io  0x0b20-0x0b3f] has been reserved
[    0.152132] system 00:08: [io  0x0900-0x090f] has been reserved
[    0.152244] system 00:08: [io  0x0910-0x091f] has been reserved
[    0.152360] system 00:08: [io  0xfe00-0xfefe] has been reserved
[    0.152476] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.152592] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.152706] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.152821] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.152938] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.152957] pnp 00:09: [io  0x00f0-0x00ff]
[    0.152975] pnp 00:09: [irq 13]
[    0.153096] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.153289] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.153573] pnp 00:0b: [mem 0xa8000000-0xbfffffff]
[    0.153782] system 00:0b: [mem 0xa8000000-0xbfffffff] has been reserved
[    0.153901] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.154159] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[    0.154358] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.154385] pnp: PnP ACPI: found 13 devices
[    0.154504] ACPI: ACPI bus type pnp unregistered
[    0.154616] PnPBIOS: Disabled by ACPI PNP
[    0.197500] PCI: max bus depth: 1 pci_try_num: 2
[    0.197557] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.197694] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.197826] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[    0.197951] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.198127] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.198259] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[    0.198396] pci 0000:00:15.0: PCI bridge to [bus 04-06]
[    0.198519] pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
[    0.198638] pci 0000:00:15.0:   bridge window [mem 0xfde00000-0xfe7fffff]
[    0.198758] pci 0000:00:15.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.198950] pci 0000:00:15.2: PCI bridge to [bus 07-07]
[    0.199077] pci 0000:00:15.2:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.199263] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.199267] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.199272] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.199276] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[    0.199282] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.199286] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.199290] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.199295] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.199299] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.199303] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.199307] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xffffffff]
[    0.199312] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.199316] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfe7fffff]
[    0.199321] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.199325] pci_bus 0000:07: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.199374] NET: Registered protocol family 2
[    0.199594] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.199858] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.200747] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.201235] TCP: Hash tables configured (established 131072 bind 65536)
[    0.201403] TCP reno registered
[    0.201515] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.201640] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.201859] NET: Registered protocol family 1
[    0.202064] pci 0000:00:01.0: Boot video device
[    0.892488] PCI: CLS 64 bytes, default 64
[    0.892575] Trying to unpack rootfs image as initramfs...
[    0.894085] rootfs image is not initramfs (no cpio magic); looks like an initrd
[    0.896531] Freeing initrd memory: 1852k freed
[    0.898586] perf: AMD IBS detected (0x000000ff)
[    0.900158] highmem bounce pool size: 64 pages
[    0.907621] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.908264] fuse init (API version 7.18)
[    0.908703] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.909992] aufs 3.3-20120402
[    0.910185] msgmni has been set to 1717
[    0.910614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.910866] io scheduler noop registered
[    0.910997] io scheduler cfq registered (default)
[    0.912491] isapnp: Scanning for PnP cards...
[    1.306801] isapnp: No Plug & Play device found
[    1.358900] brd: module loaded
[    1.439449] loop: module loaded
[    1.440528] ahci 0000:00:11.0: version 3.0
[    1.440671] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    1.440933] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    1.441932] scsi0 : ahci
[    1.442526] ata1: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c100 irq 19
[    1.449148] scsi1 : pata_legacy
[    1.449470] ata2: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    1.900352] Refined TSC clocksource calibration: 1646.493 MHz.
[    1.900490] Switching to clocksource tsc
[    1.902294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.217394] ata1.00: ATA-8: ST9500325AS, 0003SDM1, max UDMA/133
[    2.217575] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.220449] ata1.00: configured for UDMA/133
[    2.220813] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      0003 PQ: 0 ANSI: 5
[    2.221761] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.222160] sd 0:0:0:0: [sda] Write Protect is off
[    2.222334] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.222368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.249891]  sda: sda1 sda2 sda3 sda4
[    2.251145] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.252497] scsi2 : pata_legacy
[    2.252803] ata3: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    2.405457] Fusion MPT base driver 3.04.20
[    2.405634] Copyright (c) 1999-2008 LSI Corporation
[    2.405770] Fusion MPT SPI Host driver 3.04.20
[    2.406073] Fusion MPT FC Host driver 3.04.20
[    2.406339] Fusion MPT SAS Host driver 3.04.20
[    2.406726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.406971] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    2.407133] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.407393] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.407667] QUIRK: Enable AMD PLL fix
[    2.407684] ehci_hcd 0000:00:12.2: debug port 1
[    2.407833] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4a000
[    2.413063] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.413631] hub 1-0:1.0: USB hub found
[    2.413826] hub 1-0:1.0: 5 ports detected
[    2.414188] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    2.414321] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    2.414578] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.414864] ehci_hcd 0000:00:13.2: debug port 1
[    2.415015] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb48000
[    2.421054] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.421589] hub 2-0:1.0: USB hub found
[    2.424579] hub 2-0:1.0: 5 ports detected
[    2.424861] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.425097] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    2.425220] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    2.425494] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4b000
[    2.480592] hub 3-0:1.0: USB hub found
[    2.480782] hub 3-0:1.0: 5 ports detected
[    2.481130] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    2.481261] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[    2.481536] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb49000
[    2.536700] hub 4-0:1.0: USB hub found
[    2.536889] hub 4-0:1.0: 5 ports detected
[    2.537288] uhci_hcd: USB Universal Host Controller Interface driver
[    2.537753] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    2.537893] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
[    2.545152] xhci_hcd 0000:07:00.0: irq 18, io mem 0xfe800000
[    2.545366] xhci_hcd 0000:07:00.0: irq 40 for MSI/MSI-X
[    2.545378] xhci_hcd 0000:07:00.0: irq 41 for MSI/MSI-X
[    2.545389] xhci_hcd 0000:07:00.0: irq 42 for MSI/MSI-X
[    2.545755] xHCI xhci_add_endpoint called for root hub
[    2.545759] xHCI xhci_check_bandwidth called for root hub
[    2.545848] hub 5-0:1.0: USB hub found
[    2.546036] hub 5-0:1.0: 2 ports detected
[    2.546252] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    2.546379] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
[    2.550482] xHCI xhci_add_endpoint called for root hub
[    2.550486] xHCI xhci_check_bandwidth called for root hub
[    2.550609] hub 6-0:1.0: USB hub found
[    2.550803] hub 6-0:1.0: 2 ports detected
[    2.555202] Initializing USB Mass Storage driver...
[    2.555473] usbcore: registered new interface driver usb-storage
[    2.555645] USB Mass Storage support registered.
[    2.555865] usbcore: registered new interface driver ums-alauda
[    2.556218] usbcore: registered new interface driver ums-cypress
[    2.556497] usbcore: registered new interface driver ums-datafab
[    2.556727] usbcore: registered new interface driver ums_eneub6250
[    2.556913] usbcore: registered new interface driver ums-freecom
[    2.557105] usbcore: registered new interface driver ums-isd200
[    2.557286] usbcore: registered new interface driver ums-jumpshot
[    2.557462] usbcore: registered new interface driver ums-karma
[    2.557632] usbcore: registered new interface driver ums-onetouch
[    2.557811] usbcore: registered new interface driver ums-realtek
[    2.557980] usbcore: registered new interface driver ums-sddr09
[    2.558177] usbcore: registered new interface driver ums-sddr55
[    2.558348] usbcore: registered new interface driver ums-usbat
[    2.558620] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.576595] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.576787] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.577770] rtc_cmos 00:06: RTC can wake from S4
[    2.578134] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.578300] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.578783] EISA: Probing bus 0 at eisa.0
[    2.578960] EISA: Cannot allocate resource for mainboard
[    2.579106] Cannot allocate resource for EISA slot 1
[    2.579228] Cannot allocate resource for EISA slot 2
[    2.579351] Cannot allocate resource for EISA slot 3
[    2.579474] Cannot allocate resource for EISA slot 4
[    2.579596] Cannot allocate resource for EISA slot 5
[    2.579718] Cannot allocate resource for EISA slot 6
[    2.579831] Cannot allocate resource for EISA slot 7
[    2.579944] Cannot allocate resource for EISA slot 8
[    2.580089] EISA: Detected 0 cards.
[    2.580213] cpuidle: using governor ladder
[    2.580326] cpuidle: using governor menu
[    2.580774] usbcore: registered new interface driver usbhid
[    2.580938] usbhid: USB HID core driver
[    2.581411] ashmem: initialized
[    2.581648] logger: created 256K log 'log_main'
[    2.581849] logger: created 256K log 'log_events'
[    2.582045] logger: created 256K log 'log_radio'
[    2.582232] logger: created 256K log 'log_system'
[    2.582537] fujitsu-tablet: Unknown (using defaults)
[    2.582855] TCP cubic registered
[    2.583040] NET: Registered protocol family 17
[    2.583172] Using IPI No-Shortcut mode
[    2.583541] registered taskstats version 1
[    2.584376] rtc_cmos 00:06: setting system clock to 2012-04-14 17:11:12 UTC (1334423472)
[    2.595077] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.606087] RAMDISK: xz image found at block 0
[    2.993096] usb 3-3: new low-speed USB device number 2 using ohci_hcd
[    3.068259] EXT4-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended
[    3.068743] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
[    3.068929] VFS: Mounted root (ext4 filesystem) on device 1:0.
[    3.069165] Freeing unused kernel memory: 444k freed
[    3.069565] BFS CPU scheduler v0.420 by Con Kolivas.
[    3.150605] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input1
[    3.150772] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.0-3/input0
[    3.377068] usb 3-5: new full-speed USB device number 3 using ohci_hcd
[    3.639301] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[    3.757484] scsi3 : usb-storage 2-2:1.0
[    3.860137] usb 2-4: new high-speed USB device number 3 using ehci_hcd
[    4.367414] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    4.889412] scsi 3:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    5.652272] sd 3:0:0:0: [sdb] 31586304 512-byte logical blocks: (16.1 GB/15.0 GiB)
[    5.653168] sd 3:0:0:0: [sdb] Write Protect is off
[    5.653185] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    5.654184] sd 3:0:0:0: [sdb] No Caching mode page present
[    5.654200] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[    5.658272] sd 3:0:0:0: [sdb] No Caching mode page present
[    5.658281] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[    5.659922]  sdb: sdb1
[    5.664185] sd 3:0:0:0: [sdb] No Caching mode page present
[    5.664192] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[    5.664198] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[    6.272886] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   16.902606] udev[2428]: starting version 165
[   18.186658] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   18.186767] sd 3:0:0:0: Attached scsi generic sg1 type 0
[   18.532471] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
[   18.560382] mousedev: PS/2 mouse device common for all mice
[   18.934628] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[   18.934652] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[   18.937107] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[   18.947092] bcma: Bus registered
[   19.211718] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[   19.211808] ACPI: Power Button [PWRB]
[   19.211929] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[   19.216846] ACPI: Lid Switch [LID]
[   19.217024] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[   19.217151] ACPI: Sleep Button [SLPB]
[   19.217297] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   19.217362] ACPI: Power Button [PWRF]
[   19.362724] wmi: Mapper loaded
[   19.495637] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMRG 1 (20120111/utaddress-251)
[   19.495654] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.562185] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   19.562330] ACPI: AC Adapter [AC0] (off-line)
[   19.563874] ACPI: acpi_idle registered with cpuidle
[   19.573223] thermal LNXTHERM:00: registered as thermal_zone0
[   19.573230] ACPI: Thermal Zone [TZ00] (61 C)
[   19.660589] Bluetooth: Core ver 2.16
[   19.660625] NET: Registered protocol family 31
[   19.660629] Bluetooth: HCI device and connection manager initialized
[   19.660635] Bluetooth: HCI socket layer initialized
[   19.660638] Bluetooth: L2CAP socket layer initialized
[   19.660647] Bluetooth: SCO socket layer initialized
[   19.720709] Linux media interface: v0.10
[   19.916683] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   20.063923] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   20.063939] ACPI: Battery Slot [BAT0] (battery present)
[   20.076286] acpi device:44: registered as cooling_device2
[   20.076423] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   20.076511] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   20.091681] Linux agpgart interface v0.103
[   20.093097] usbcore: registered new interface driver btusb
[   20.252413] Linux video capture interface: v2.00
[   20.388000] cfg80211: Calling CRDA to update world regulatory domain
[   20.449272] [drm] Initialized drm 1.1.0 20060810
[   20.671224] asus_wmi: ASUS WMI generic driver loaded
[   20.776793] cfg80211: World regulatory domain updated:
[   20.776802] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.776808] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (500 mBi, 2000 mBm)
[   20.883483] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
[   20.959334] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5711)
[   20.962661] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0400
[   20.977809] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input7
[   20.977928] usbcore: registered new interface driver uvcvideo
[   20.977933] USB Video Class driver (1.1.1)
[   21.042858] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   21.200249] asus_wmi: Initialization: 0x0
[   21.200301] asus_wmi: BIOS WMI version: 0.9
[   21.200399] asus_wmi: SFUN value: 0x0
[   21.202183] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
[   21.214330] asus_wmi: Backlight controlled by ACPI video driver
[   21.273189] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 16
[   21.277349] ieee80211 phy0: brcmsmac: fail to load firmware brcm/bcm43xx-0.fw
[   21.277358] ieee80211 phy0: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm
[   21.277369] brcmsmac: brcms_bcma_probe: brcms_attach failed!
[   21.277405] brcms_module_init: register returned 0
[   21.336806] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   21.336979] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
[   21.354199] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[   21.354513] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[   21.442255] [drm] radeon defaulting to kernel modesetting.
[   21.442261] [drm] radeon kernel modesetting enabled.
[   21.443152] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x1043:0x84E3).
[   21.443249] [drm] register mmio base: 0xFEB00000
[   21.443253] [drm] register mmio size: 262144
[   21.443502] ATOM BIOS: AMD
[   21.443545] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[   21.443551] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
[   21.443562] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[   21.443567] [drm] Detected VRAM RAM=384M, BAR=256M
[   21.443570] [drm] RAM width 32bits DDR
[   21.443751] [TTM] Zone  kernel: Available graphics memory: 439908 kiB.
[   21.443757] [TTM] Zone highmem: Available graphics memory: 1359862 kiB.
[   21.443760] [TTM] Initializing pool allocator.
[   21.443884] [drm] radeon: 384M of VRAM memory ready
[   21.443889] [drm] radeon: 512M of GTT memory ready.
[   21.443909] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   21.443912] [drm] Driver supports precise vblank timestamp query.
[   21.443968] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
[   21.443987] radeon 0000:00:01.0: radeon: using MSI.
[   21.444056] [drm] radeon: irq initialized.
[   21.444065] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   21.444957] [drm] radeon: ib pool ready.
[   21.445160] [drm] Loading PALM Microcode
[   21.668970] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   21.669202] radeon 0000:00:01.0: WB enabled
[   21.669208] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffaa6c00
[   21.689923] [drm] ring test on 0 succeeded in 1 usecs
[   21.690167] [drm] ib test on ring 0 succeeded in 0 usecs
[   21.690663] [drm] Radeon Display Connectors
[   21.690667] [drm] Connector 0:
[   21.690670] [drm]   LVDS
[   21.690673] [drm]   HPD1
[   21.690677] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   21.690681] [drm]   Encoders:
[   21.690684] [drm]     LCD1: INTERNAL_UNIPHY
[   21.690687] [drm] Connector 1:
[   21.690689] [drm]   HDMI-A
[   21.690692] [drm]   HPD2
[   21.690695] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   21.690698] [drm]   Encoders:
[   21.690701] [drm]     DFP1: INTERNAL_UNIPHY
[   21.690704] [drm] Connector 2:
[   21.690706] [drm]   VGA
[   21.690710] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   21.690713] [drm]   Encoders:
[   21.690715] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   21.690772] [drm] Internal thermal controller without fan control
[   21.690841] [drm] radeon: power management initialized
[   22.134855] [drm] fb mappable at 0xC0142000
[   22.134861] [drm] vram apper at 0xC0000000
[   22.134864] [drm] size 4325376
[   22.134867] [drm] fb depth is 24
[   22.134869] [drm]    pitch is 5632
[   22.135012] fbcon: radeondrmfb (fb0) is primary device
[   22.671637] Console: switching to colour frame buffer device 170x48
[   22.678908] fb0: radeondrmfb frame buffer device
[   22.678912] drm: registered panic notifier
[   22.678923] [drm] Initialized radeon 2.13.0 20080528 for 0000:00:01.0 on minor 0
[   23.444982] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   32.029601] NET: Registered protocol family 10
[   42.021670] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[   42.096609] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   44.403629] start_kdeinit (3674): /proc/3674/oom_adj is deprecated, please use /proc/3674/oom_score_adj instead.
[  102.980493] Broadcom 43xx driver loaded [ Features: PMNLS ]
[  244.892246] usb 1-1: new high-speed USB device number 4 using ehci_hcd
[  245.293257] usb 1-1: reset high-speed USB device number 4 using ehci_hcd
[  245.520875] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[  245.521295] Registered led device: rt2800usb-phy1::radio
[  245.521326] Registered led device: rt2800usb-phy1::assoc
[  245.521357] Registered led device: rt2800usb-phy1::quality
[  245.521389] usbcore: registered new interface driver rt2800usb
[  282.342719] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  372.790560] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  373.066821] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[  373.142736] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  373.418852] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  376.531488] wlan0: authenticate with 00:23:f8:b5:86:43 (try 1)
[  376.533282] wlan0: authenticated
[  376.533358] wlan0: associate with 00:23:f8:b5:86:43 (try 1)
[  376.537047] wlan0: RX AssocResp from 00:23:f8:b5:86:43 (capab=0x431 status=0 aid=2)
[  376.537060] wlan0: associated
[  376.537072] wlan0: moving STA 00:23:f8:b5:86:43 to state 1
[  376.537080] wlan0: moving STA 00:23:f8:b5:86:43 to state 2
[  376.537087] wlan0: moving STA 00:23:f8:b5:86:43 to state 3
[  376.545911] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  387.426200] wlan0: no IPv6 routers present
[  503.457170] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[  503.457473] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  508.584014] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Down
[  514.066195] eth0: no IPv6 routers present
[ 1375.890671] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 1381.008023] ------------[ cut here ]------------
[ 1381.008040] WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0xca/0x11d()
[ 1381.008044] Hardware name: 1215B
[ 1381.008048] NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out
[ 1381.008051] Modules linked in: cryptomgr aead arc4 crypto_algapi rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib ssb mmc_core rng_core ipv6 snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss radeon snd_hda_codec_realtek snd_hda_codec_hdmi brcmsmac eeepc_wmi ttm mac80211 uvcvideo snd_hda_intel brcmutil drm_kms_helper asus_wmi snd_hda_codec videobuf2_core drm cfg80211 snd_hwdep sparse_keymap videodev crc8 btusb agpgart snd_pcm snd_timer pci_hotplug psmouse snd media bluetooth cordic processor thermal battery video ac i2c_piix4 i2c_algo_bit soundcore wmi power_supply serio_raw button thermal_sys videobuf2_vmalloc k10temp bcma crypto snd_page_alloc videobuf2_memops i2c_core mousedev evdev hwmon atl1c rfkill sg [last unloaded: b43]
[ 1381.008148] Pid: 3527, comm: X Not tainted 3.3.2-wifislax #1
[ 1381.008151] Call Trace:
[ 1381.008161]  [<c10202bb>] ? warn_slowpath_common+0x7c/0x8f
[ 1381.008167]  [<c13033f3>] ? dev_watchdog+0xca/0x11d
[ 1381.008172]  [<c13033f3>] ? dev_watchdog+0xca/0x11d
[ 1381.008178]  [<c1020357>] ? warn_slowpath_fmt+0x33/0x37
[ 1381.008183]  [<c13033f3>] ? dev_watchdog+0xca/0x11d
[ 1381.008192]  [<c1303329>] ? netif_tx_unlock+0x3c/0x3c
[ 1381.008198]  [<c1027ffa>] ? run_timer_softirq+0x125/0x1b2
[ 1381.008203]  [<c102436c>] ? __do_softirq+0x71/0x108
[ 1381.008209]  [<c10242fb>] ? local_bh_enable+0x2/0x2
[ 1381.008212]  <IRQ>  [<c10245d0>] ? irq_exit+0x3d/0x95
[ 1381.008222]  [<c101560d>] ? smp_apic_timer_interrupt+0x61/0x6e
[ 1381.008228]  [<c135a521>] ? apic_timer_interrupt+0x31/0x40
[ 1381.008232] ---[ end trace 87192a2e1927dafa ]---
[ 1381.066044] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[ 1381.066877] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 1402.282389] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Down
[ 1774.119122] Broadcom 43xx driver loaded [ Features: PMNLS ]
wifislax ~ #[/spoiler]

« Última modificación: 15-04-2012, 00:00 (Domingo) por USUARIONUEVO »
En línea

inguaite

  • Visitante
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #6 en: 14-04-2012, 22:52 (Sábado) »
brcmsmac

[spoiler]
Código: [Seleccionar]
wifislax ~ # dmesg
em 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.148286] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.148404] system 00:02: [mem 0xffe00000-0xffffffff] has been reserved
[    0.148521] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.148604] pnp 00:03: [irq 12]
[    0.148698] pnp 00:03: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.148750] pnp 00:04: [io  0x0060]
[    0.148755] pnp 00:04: [io  0x0064]
[    0.148772] pnp 00:04: [irq 1]
[    0.148867] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.148900] pnp 00:05: [dma 4]
[    0.148904] pnp 00:05: [io  0x0000-0x000f]
[    0.148908] pnp 00:05: [io  0x0081-0x0083]
[    0.148912] pnp 00:05: [io  0x0087]
[    0.148915] pnp 00:05: [io  0x0089-0x008b]
[    0.148918] pnp 00:05: [io  0x008f]
[    0.148922] pnp 00:05: [io  0x00c0-0x00df]
[    0.149016] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.149035] pnp 00:06: [io  0x0070-0x0071]
[    0.149045] pnp 00:06: [irq 8]
[    0.149153] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.149197] pnp 00:07: [io  0x0061]
[    0.149390] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.149664] pnp 00:08: [io  0x0010-0x001f]
[    0.149668] pnp 00:08: [io  0x0022-0x003f]
[    0.149672] pnp 00:08: [io  0x0062-0x0063]
[    0.149675] pnp 00:08: [io  0x0065-0x006f]
[    0.149679] pnp 00:08: [io  0x0072-0x007f]
[    0.149682] pnp 00:08: [io  0x0080]
[    0.149686] pnp 00:08: [io  0x0084-0x0086]
[    0.149689] pnp 00:08: [io  0x0088]
[    0.149692] pnp 00:08: [io  0x008c-0x008e]
[    0.149696] pnp 00:08: [io  0x0090-0x009f]
[    0.149699] pnp 00:08: [io  0x00a2-0x00bf]
[    0.149703] pnp 00:08: [io  0x00b1]
[    0.149706] pnp 00:08: [io  0x00e0-0x00ef]
[    0.149709] pnp 00:08: [io  0x04d0-0x04d1]
[    0.149713] pnp 00:08: [io  0x040b]
[    0.149716] pnp 00:08: [io  0x04d6]
[    0.149719] pnp 00:08: [io  0x0c00-0x0c01]
[    0.149722] pnp 00:08: [io  0x0c14]
[    0.149726] pnp 00:08: [io  0x0c50-0x0c51]
[    0.149729] pnp 00:08: [io  0x0c52]
[    0.149732] pnp 00:08: [io  0x0c6c]
[    0.149735] pnp 00:08: [io  0x0c6f]
[    0.149739] pnp 00:08: [io  0x0cd0-0x0cd1]
[    0.149742] pnp 00:08: [io  0x0cd2-0x0cd3]
[    0.149746] pnp 00:08: [io  0x0cd4-0x0cd5]
[    0.149749] pnp 00:08: [io  0x0cd6-0x0cd7]
[    0.149752] pnp 00:08: [io  0x0cd8-0x0cdf]
[    0.149756] pnp 00:08: [io  0x0b00-0x0b3f]
[    0.149759] pnp 00:08: [io  0x0800-0x089f]
[    0.149763] pnp 00:08: [io  0x0000-0xffffffff disabled]
[    0.149767] pnp 00:08: [io  0x0b00-0x0b0f]
[    0.149770] pnp 00:08: [io  0x0b20-0x0b3f]
[    0.149773] pnp 00:08: [io  0x0900-0x090f]
[    0.149777] pnp 00:08: [io  0x0910-0x091f]
[    0.149780] pnp 00:08: [io  0xfe00-0xfefe]
[    0.149784] pnp 00:08: [io  0x0060-0x005f disabled]
[    0.149788] pnp 00:08: [io  0x0064-0x0063 disabled]
[    0.149792] pnp 00:08: [mem 0x00000000-0xffffffff disabled]
[    0.149796] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[    0.149799] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[    0.149803] pnp 00:08: [mem 0xfed40000-0xfed44fff]
[    0.149807] pnp 00:08: [mem 0xfed80000-0xfed80fff]
[    0.149810] pnp 00:08: [mem 0x00000000-0xffffffff disabled]
[    0.150037] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.150162] system 00:08: [io  0x040b] has been reserved
[    0.150276] system 00:08: [io  0x04d6] has been reserved
[    0.150392] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.150506] system 00:08: [io  0x0c14] has been reserved
[    0.150621] system 00:08: [io  0x0c50-0x0c51] has been reserved
[    0.150732] system 00:08: [io  0x0c52] has been reserved
[    0.150846] system 00:08: [io  0x0c6c] has been reserved
[    0.150958] system 00:08: [io  0x0c6f] has been reserved
[    0.151098] system 00:08: [io  0x0cd0-0x0cd1] has been reserved
[    0.151212] system 00:08: [io  0x0cd2-0x0cd3] has been reserved
[    0.151325] system 00:08: [io  0x0cd4-0x0cd5] has been reserved
[    0.151438] system 00:08: [io  0x0cd6-0x0cd7] has been reserved
[    0.151551] system 00:08: [io  0x0cd8-0x0cdf] has been reserved
[    0.151664] system 00:08: [io  0x0b00-0x0b3f] could not be reserved
[    0.151778] system 00:08: [io  0x0800-0x089f] has been reserved
[    0.151892] system 00:08: [io  0x0b00-0x0b0f] has been reserved
[    0.152018] system 00:08: [io  0x0b20-0x0b3f] has been reserved
[    0.152132] system 00:08: [io  0x0900-0x090f] has been reserved
[    0.152244] system 00:08: [io  0x0910-0x091f] has been reserved
[    0.152360] system 00:08: [io  0xfe00-0xfefe] has been reserved
[    0.152476] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.152592] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.152706] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.152821] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.152938] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.152957] pnp 00:09: [io  0x00f0-0x00ff]
[    0.152975] pnp 00:09: [irq 13]
[    0.153096] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.153289] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.153573] pnp 00:0b: [mem 0xa8000000-0xbfffffff]
[    0.153782] system 00:0b: [mem 0xa8000000-0xbfffffff] has been reserved
[    0.153901] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.154159] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[    0.154358] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.154385] pnp: PnP ACPI: found 13 devices
[    0.154504] ACPI: ACPI bus type pnp unregistered
[    0.154616] PnPBIOS: Disabled by ACPI PNP
[    0.197500] PCI: max bus depth: 1 pci_try_num: 2
[    0.197557] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.197694] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.197826] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[    0.197951] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.198127] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.198259] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[    0.198396] pci 0000:00:15.0: PCI bridge to [bus 04-06]
[    0.198519] pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
[    0.198638] pci 0000:00:15.0:   bridge window [mem 0xfde00000-0xfe7fffff]
[    0.198758] pci 0000:00:15.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.198950] pci 0000:00:15.2: PCI bridge to [bus 07-07]
[    0.199077] pci 0000:00:15.2:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.199263] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.199267] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.199272] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.199276] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[    0.199282] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.199286] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.199290] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.199295] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.199299] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.199303] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.199307] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xffffffff]
[    0.199312] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.199316] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfe7fffff]
[    0.199321] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.199325] pci_bus 0000:07: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.199374] NET: Registered protocol family 2
[    0.199594] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.199858] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.200747] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.201235] TCP: Hash tables configured (established 131072 bind 65536)
[    0.201403] TCP reno registered
[    0.201515] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.201640] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.201859] NET: Registered protocol family 1
[    0.202064] pci 0000:00:01.0: Boot video device
[    0.892488] PCI: CLS 64 bytes, default 64
[    0.892575] Trying to unpack rootfs image as initramfs...
[    0.894085] rootfs image is not initramfs (no cpio magic); looks like an initrd
[    0.896531] Freeing initrd memory: 1852k freed
[    0.898586] perf: AMD IBS detected (0x000000ff)
[    0.900158] highmem bounce pool size: 64 pages
[    0.907621] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.908264] fuse init (API version 7.18)
[    0.908703] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.909992] aufs 3.3-20120402
[    0.910185] msgmni has been set to 1717
[    0.910614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.910866] io scheduler noop registered
[    0.910997] io scheduler cfq registered (default)
[    0.912491] isapnp: Scanning for PnP cards...
[    1.306801] isapnp: No Plug & Play device found
[    1.358900] brd: module loaded
[    1.439449] loop: module loaded
[    1.440528] ahci 0000:00:11.0: version 3.0
[    1.440671] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    1.440933] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    1.441932] scsi0 : ahci
[    1.442526] ata1: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c100 irq 19
[    1.449148] scsi1 : pata_legacy
[    1.449470] ata2: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    1.900352] Refined TSC clocksource calibration: 1646.493 MHz.
[    1.900490] Switching to clocksource tsc
[    1.902294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.217394] ata1.00: ATA-8: ST9500325AS, 0003SDM1, max UDMA/133
[    2.217575] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.220449] ata1.00: configured for UDMA/133
[    2.220813] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      0003 PQ: 0 ANSI: 5
[    2.221761] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.222160] sd 0:0:0:0: [sda] Write Protect is off
[    2.222334] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.222368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.249891]  sda: sda1 sda2 sda3 sda4
[    2.251145] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.252497] scsi2 : pata_legacy
[    2.252803] ata3: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    2.405457] Fusion MPT base driver 3.04.20
[    2.405634] Copyright (c) 1999-2008 LSI Corporation
[    2.405770] Fusion MPT SPI Host driver 3.04.20
[    2.406073] Fusion MPT FC Host driver 3.04.20
[    2.406339] Fusion MPT SAS Host driver 3.04.20
[    2.406726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.406971] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    2.407133] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.407393] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.407667] QUIRK: Enable AMD PLL fix
[    2.407684] ehci_hcd 0000:00:12.2: debug port 1
[    2.407833] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4a000
[    2.413063] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.413631] hub 1-0:1.0: USB hub found
[    2.413826] hub 1-0:1.0: 5 ports detected
[    2.414188] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    2.414321] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    2.414578] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.414864] ehci_hcd 0000:00:13.2: debug port 1
[    2.415015] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb48000
[    2.421054] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.421589] hub 2-0:1.0: USB hub found
[    2.424579] hub 2-0:1.0: 5 ports detected
[    2.424861] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.425097] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    2.425220] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    2.425494] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4b000
[    2.480592] hub 3-0:1.0: USB hub found
[    2.480782] hub 3-0:1.0: 5 ports detected
[    2.481130] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    2.481261] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[    2.481536] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb49000
[    2.536700] hub 4-0:1.0: USB hub found
[    2.536889] hub 4-0:1.0: 5 ports detected
[    2.537288] uhci_hcd: USB Universal Host Controller Interface driver
[    2.537753] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    2.537893] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
[    2.545152] xhci_hcd 0000:07:00.0: irq 18, io mem 0xfe800000
[    2.545366] xhci_hcd 0000:07:00.0: irq 40 for MSI/MSI-X
[    2.545378] xhci_hcd 0000:07:00.0: irq 41 for MSI/MSI-X
[    2.545389] xhci_hcd 0000:07:00.0: irq 42 for MSI/MSI-X
[    2.545755] xHCI xhci_add_endpoint called for root hub
[    2.545759] xHCI xhci_check_bandwidth called for root hub
[    2.545848] hub 5-0:1.0: USB hub found
[    2.546036] hub 5-0:1.0: 2 ports detected
[    2.546252] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    2.546379] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
[    2.550482] xHCI xhci_add_endpoint called for root hub
[    2.550486] xHCI xhci_check_bandwidth called for root hub
[    2.550609] hub 6-0:1.0: USB hub found
[    2.550803] hub 6-0:1.0: 2 ports detected
[    2.555202] Initializing USB Mass Storage driver...
[    2.555473] usbcore: registered new interface driver usb-storage
[    2.555645] USB Mass Storage support registered.
[    2.555865] usbcore: registered new interface driver ums-alauda
[    2.556218] usbcore: registered new interface driver ums-cypress
[    2.556497] usbcore: registered new interface driver ums-datafab
[    2.556727] usbcore: registered new interface driver ums_eneub6250
[    2.556913] usbcore: registered new interface driver ums-freecom
[    2.557105] usbcore: registered new interface driver ums-isd200
[    2.557286] usbcore: registered new interface driver ums-jumpshot
[    2.557462] usbcore: registered new interface driver ums-karma
[    2.557632] usbcore: registered new interface driver ums-onetouch
[    2.557811] usbcore: registered new interface driver ums-realtek
[    2.557980] usbcore: registered new interface driver ums-sddr09
[    2.558177] usbcore: registered new interface driver ums-sddr55
[    2.558348] usbcore: registered new interface driver ums-usbat
[    2.558620] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.576595] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.576787] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.577770] rtc_cmos 00:06: RTC can wake from S4
[    2.578134] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.578300] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.578783] EISA: Probing bus 0 at eisa.0
[    2.578960] EISA: Cannot allocate resource for mainboard
[    2.579106] Cannot allocate resource for EISA slot 1
[    2.579228] Cannot allocate resource for EISA slot 2
[    2.579351] Cannot allocate resource for EISA slot 3
[    2.579474] Cannot allocate resource for EISA slot 4
[    2.579596] Cannot allocate resource for EISA slot 5
[    2.579718] Cannot allocate resource for EISA slot 6
[    2.579831] Cannot allocate resource for EISA slot 7
[    2.579944] Cannot allocate resource for EISA slot 8
[    2.580089] EISA: Detected 0 cards.
[    2.580213] cpuidle: using governor ladder
[    2.580326] cpuidle: using governor menu
[    2.580774] usbcore: registered new interface driver usbhid
[    2.580938] usbhid: USB HID core driver
[    2.581411] ashmem: initialized
[    2.581648] logger: created 256K log 'log_main'
[    2.581849] logger: created 256K log 'log_events'
[    2.582045] logger: created 256K log 'log_radio'
[    2.582232] logger: created 256K log 'log_system'
[    2.582537] fujitsu-tablet: Unknown (using defaults)
[    2.582855] TCP cubic registered
[    2.583040] NET: Registered protocol family 17
[    2.583172] Using IPI No-Shortcut mode
[    2.583541] registered taskstats version 1
[    2.584376] rtc_cmos 00:06: setting system clock to 2012-04-14 17:11:12 UTC (1334423472)
[    2.595077] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.606087] RAMDISK: xz image found at block 0
[    2.993096] usb 3-3: new low-speed USB device number 2 using ohci_hcd
[    3.068259] EXT4-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended
[    3.068743] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
[    3.068929] VFS: Mounted root (ext4 filesystem) on device 1:0.
[    3.069165] Freeing unused kernel memory: 444k freed
[    3.069565] BFS CPU scheduler v0.420 by Con Kolivas.
[    3.150605] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input1
[    3.150772] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.0-3/input0
[    3.377068] usb 3-5: new full-speed USB device number 3 using ohci_hcd
[    3.639301] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[    3.757484] scsi3 : usb-storage 2-2:1.0
[    3.860137] usb 2-4: new high-speed USB device number 3 using ehci_hcd
[    4.367414] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    4.889412] scsi 3:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    5.652272] sd 3:0:0:0: [sdb] 31586304 512-byte logical blocks: (16.1 GB/15.0 GiB)
[    5.653168] sd 3:0:0:0: [sdb] Write Protect is off
[    5.653185] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    5.654184] sd 3:0:0:0: [sdb] No Caching mode page present
[    5.654200] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[    5.658272] sd 3:0:0:0: [sdb] No Caching mode page present
[    5.658281] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[    5.659922]  sdb: sdb1
[    5.664185] sd 3:0:0:0: [sdb] No Caching mode page present
[    5.664192] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[    5.664198] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[    6.272886] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   16.902606] udev[2428]: starting version 165
[   18.186658] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   18.186767] sd 3:0:0:0: Attached scsi generic sg1 type 0
[   18.532471] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
[   18.560382] mousedev: PS/2 mouse device common for all mice
[   18.934628] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[   18.934652] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[   18.937107] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[   18.947092] bcma: Bus registered
[   19.211718] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[   19.211808] ACPI: Power Button [PWRB]
[   19.211929] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[   19.216846] ACPI: Lid Switch [LID]
[   19.217024] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[   19.217151] ACPI: Sleep Button [SLPB]
[   19.217297] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   19.217362] ACPI: Power Button [PWRF]
[   19.362724] wmi: Mapper loaded
[   19.495637] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMRG 1 (20120111/utaddress-251)
[   19.495654] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.562185] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   19.562330] ACPI: AC Adapter [AC0] (off-line)
[   19.563874] ACPI: acpi_idle registered with cpuidle
[   19.573223] thermal LNXTHERM:00: registered as thermal_zone0
[   19.573230] ACPI: Thermal Zone [TZ00] (61 C)
[   19.660589] Bluetooth: Core ver 2.16
[   19.660625] NET: Registered protocol family 31
[   19.660629] Bluetooth: HCI device and connection manager initialized
[   19.660635] Bluetooth: HCI socket layer initialized
[   19.660638] Bluetooth: L2CAP socket layer initialized
[   19.660647] Bluetooth: SCO socket layer initialized
[   19.720709] Linux media interface: v0.10
[   19.916683] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   20.063923] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   20.063939] ACPI: Battery Slot [BAT0] (battery present)
[   20.076286] acpi device:44: registered as cooling_device2
[   20.076423] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   20.076511] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   20.091681] Linux agpgart interface v0.103
[   20.093097] usbcore: registered new interface driver btusb
[   20.252413] Linux video capture interface: v2.00
[   20.388000] cfg80211: Calling CRDA to update world regulatory domain
[   20.449272] [drm] Initialized drm 1.1.0 20060810
[   20.671224] asus_wmi: ASUS WMI generic driver loaded
[   20.776793] cfg80211: World regulatory domain updated:
[   20.776802] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.776808] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (500 mBi, 2000 mBm)
[   20.883483] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
[   20.959334] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5711)
[   20.962661] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0400
[   20.977809] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input7
[   20.977928] usbcore: registered new interface driver uvcvideo
[   20.977933] USB Video Class driver (1.1.1)
[   21.042858] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   21.200249] asus_wmi: Initialization: 0x0
[   21.200301] asus_wmi: BIOS WMI version: 0.9
[   21.200399] asus_wmi: SFUN value: 0x0
[   21.202183] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
[   21.214330] asus_wmi: Backlight controlled by ACPI video driver
[   21.273189] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 16
[   21.277349] ieee80211 phy0: brcmsmac: fail to load firmware brcm/bcm43xx-0.fw
[   21.277358] ieee80211 phy0: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm
[   21.277369] brcmsmac: brcms_bcma_probe: brcms_attach failed!
[   21.277405] brcms_module_init: register returned 0
[   21.336806] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   21.336979] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
[   21.354199] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[   21.354513] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[   21.442255] [drm] radeon defaulting to kernel modesetting.
[   21.442261] [drm] radeon kernel modesetting enabled.
[   21.443152] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x1043:0x84E3).
[   21.443249] [drm] register mmio base: 0xFEB00000
[   21.443253] [drm] register mmio size: 262144
[   21.443502] ATOM BIOS: AMD
[   21.443545] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[   21.443551] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
[   21.443562] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[   21.443567] [drm] Detected VRAM RAM=384M, BAR=256M
[   21.443570] [drm] RAM width 32bits DDR
[   21.443751] [TTM] Zone  kernel: Available graphics memory: 439908 kiB.
[   21.443757] [TTM] Zone highmem: Available graphics memory: 1359862 kiB.
[   21.443760] [TTM] Initializing pool allocator.
[   21.443884] [drm] radeon: 384M of VRAM memory ready
[   21.443889] [drm] radeon: 512M of GTT memory ready.
[   21.443909] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   21.443912] [drm] Driver supports precise vblank timestamp query.
[   21.443968] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
[   21.443987] radeon 0000:00:01.0: radeon: using MSI.
[   21.444056] [drm] radeon: irq initialized.
[   21.444065] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   21.444957] [drm] radeon: ib pool ready.
[   21.445160] [drm] Loading PALM Microcode
[   21.668970] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   21.669202] radeon 0000:00:01.0: WB enabled
[   21.669208] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffaa6c00
[   21.689923] [drm] ring test on 0 succeeded in 1 usecs
[   21.690167] [drm] ib test on ring 0 succeeded in 0 usecs
[   21.690663] [drm] Radeon Display Connectors
[   21.690667] [drm] Connector 0:
[   21.690670] [drm]   LVDS
[   21.690673] [drm]   HPD1
[   21.690677] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   21.690681] [drm]   Encoders:
[   21.690684] [drm]     LCD1: INTERNAL_UNIPHY
[   21.690687] [drm] Connector 1:
[   21.690689] [drm]   HDMI-A
[   21.690692] [drm]   HPD2
[   21.690695] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   21.690698] [drm]   Encoders:
[   21.690701] [drm]     DFP1: INTERNAL_UNIPHY
[   21.690704] [drm] Connector 2:
[   21.690706] [drm]   VGA
[   21.690710] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   21.690713] [drm]   Encoders:
[   21.690715] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   21.690772] [drm] Internal thermal controller without fan control
[   21.690841] [drm] radeon: power management initialized
[   22.134855] [drm] fb mappable at 0xC0142000
[   22.134861] [drm] vram apper at 0xC0000000
[   22.134864] [drm] size 4325376
[   22.134867] [drm] fb depth is 24
[   22.134869] [drm]    pitch is 5632
[   22.135012] fbcon: radeondrmfb (fb0) is primary device
[   22.671637] Console: switching to colour frame buffer device 170x48
[   22.678908] fb0: radeondrmfb frame buffer device
[   22.678912] drm: registered panic notifier
[   22.678923] [drm] Initialized radeon 2.13.0 20080528 for 0000:00:01.0 on minor 0
[   23.444982] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   32.029601] NET: Registered protocol family 10
[   42.021670] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[   42.096609] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   44.403629] start_kdeinit (3674): /proc/3674/oom_adj is deprecated, please use /proc/3674/oom_score_adj instead.
[  102.980493] Broadcom 43xx driver loaded [ Features: PMNLS ]
[  244.892246] usb 1-1: new high-speed USB device number 4 using ehci_hcd
[  245.293257] usb 1-1: reset high-speed USB device number 4 using ehci_hcd
[  245.520875] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[  245.521295] Registered led device: rt2800usb-phy1::radio
[  245.521326] Registered led device: rt2800usb-phy1::assoc
[  245.521357] Registered led device: rt2800usb-phy1::quality
[  245.521389] usbcore: registered new interface driver rt2800usb
[  282.342719] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  372.790560] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  373.066821] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[  373.142736] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  373.418852] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  376.531488] wlan0: authenticate with 00:23:f8:b5:86:43 (try 1)
[  376.533282] wlan0: authenticated
[  376.533358] wlan0: associate with 00:23:f8:b5:86:43 (try 1)
[  376.537047] wlan0: RX AssocResp from 00:23:f8:b5:86:43 (capab=0x431 status=0 aid=2)
[  376.537060] wlan0: associated
[  376.537072] wlan0: moving STA 00:23:f8:b5:86:43 to state 1
[  376.537080] wlan0: moving STA 00:23:f8:b5:86:43 to state 2
[  376.537087] wlan0: moving STA 00:23:f8:b5:86:43 to state 3
[  376.545911] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  387.426200] wlan0: no IPv6 routers present
[  503.457170] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[  503.457473] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  508.584014] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Down
[  514.066195] eth0: no IPv6 routers present
[ 1375.890671] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 1381.008023] ------------[ cut here ]------------
[ 1381.008040] WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0xca/0x11d()
[ 1381.008044] Hardware name: 1215B
[ 1381.008048] NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out
[ 1381.008051] Modules linked in: cryptomgr aead arc4 crypto_algapi rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib ssb mmc_core rng_core ipv6 snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss radeon snd_hda_codec_realtek snd_hda_codec_hdmi brcmsmac eeepc_wmi ttm mac80211 uvcvideo snd_hda_intel brcmutil drm_kms_helper asus_wmi snd_hda_codec videobuf2_core drm cfg80211 snd_hwdep sparse_keymap videodev crc8 btusb agpgart snd_pcm snd_timer pci_hotplug psmouse snd media bluetooth cordic processor thermal battery video ac i2c_piix4 i2c_algo_bit soundcore wmi power_supply serio_raw button thermal_sys videobuf2_vmalloc k10temp bcma crypto snd_page_alloc videobuf2_memops i2c_core mousedev evdev hwmon atl1c rfkill sg [last unloaded: b43]
[ 1381.008148] Pid: 3527, comm: X Not tainted 3.3.2-wifislax #1
[ 1381.008151] Call Trace:
[ 1381.008161]  [<c10202bb>] ? warn_slowpath_common+0x7c/0x8f
[ 1381.008167]  [<c13033f3>] ? dev_watchdog+0xca/0x11d
[ 1381.008172]  [<c13033f3>] ? dev_watchdog+0xca/0x11d
[ 1381.008178]  [<c1020357>] ? warn_slowpath_fmt+0x33/0x37
[ 1381.008183]  [<c13033f3>] ? dev_watchdog+0xca/0x11d
[ 1381.008192]  [<c1303329>] ? netif_tx_unlock+0x3c/0x3c
[ 1381.008198]  [<c1027ffa>] ? run_timer_softirq+0x125/0x1b2
[ 1381.008203]  [<c102436c>] ? __do_softirq+0x71/0x108
[ 1381.008209]  [<c10242fb>] ? local_bh_enable+0x2/0x2
[ 1381.008212]  <IRQ>  [<c10245d0>] ? irq_exit+0x3d/0x95
[ 1381.008222]  [<c101560d>] ? smp_apic_timer_interrupt+0x61/0x6e
[ 1381.008228]  [<c135a521>] ? apic_timer_interrupt+0x31/0x40
[ 1381.008232] ---[ end trace 87192a2e1927dafa ]---
[ 1381.066044] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[ 1381.066877] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 1402.282389] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Down
[ 1774.119122] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 1922.741360] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 16
[ 1922.743569] ieee80211 phy2: brcmsmac: fail to load firmware brcm/bcm43xx-0.fw
[ 1922.743577] ieee80211 phy2: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm
[ 1922.743588] brcmsmac: brcms_bcma_probe: brcms_attach failed!
[ 1922.743624] brcms_module_init: register returned 0
wifislax ~ #[/spoiler]

Reinicio y hago lo de lsmod
« Última modificación: 15-04-2012, 00:00 (Domingo) por USUARIONUEVO »
En línea

Conectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 15985
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #7 en: 14-04-2012, 23:03 (Sábado) »
Código: [Seleccionar]
[ 1922.743569] ieee80211 phy2: brcmsmac: fail to load firmware brcm/bcm43xx-0.fw
[ 1922.743577] ieee80211 phy2: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm
En línea

Conectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 15985
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #8 en: 14-04-2012, 23:05 (Sábado) »
cosa rara , por que hace na que actualice firmwares,pero dice que ese concreto no esta.


voy a buscar.
En línea

inguaite

  • Visitante
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #9 en: 14-04-2012, 23:06 (Sábado) »
lsmod recien iniciado:

[spoiler]
Código: [Seleccionar]
Module                  Size  Used by
ipv6                  176621  12
snd_seq_dummy            971  0
snd_seq_oss            20693  0
snd_seq_midi_event      3580  1 snd_seq_oss
snd_seq                34379  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          3617  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            25552  0
snd_mixer_oss          10257  3 snd_pcm_oss
cryptomgr               1795  0
aead                    4104  1 cryptomgr
arc4                     950  2
crypto_algapi           8256  3 cryptomgr,aead,arc4
rt2800usb              10173  0
rt2800lib              31521  1 rt2800usb
radeon                600443  2
snd_hda_codec_realtek    79625  1
ttm                    37330  1 radeon
crc_ccitt                999  1 rt2800lib
eeepc_wmi               1720  0
snd_hda_codec_hdmi     19015  1
drm_kms_helper         18830  1 radeon
uvcvideo               51369  0
rt2x00usb               6348  1 rt2800usb
brcmsmac              443867  0
snd_hda_intel          17608  2
asus_wmi               11112  1 eeepc_wmi
rt2x00lib              24848  3 rt2800usb,rt2800lib,rt2x00usb
brcmutil                1864  1 brcmsmac
videobuf2_core         13830  1 uvcvideo
drm                   140995  4 radeon,ttm,drm_kms_helper
snd_hda_codec          57917  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
sparse_keymap           1916  1 asus_wmi
videodev               58994  1 uvcvideo
mac80211              152082  4 rt2800lib,rt2x00usb,brcmsmac,rt2x00lib
crc8                     700  1 brcmsmac
snd_hwdep               3963  1 snd_hda_codec
snd_pcm                42869  4 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
video                   9657  0
agpgart                18017  2 ttm,drm
processor              22689  2
btusb                   7933  0
pci_hotplug            17573  1 asus_wmi
media                   6692  2 uvcvideo,videodev
bluetooth             108195  1 btusb
cordic                   657  1 brcmsmac
snd_timer              12345  2 snd_seq,snd_pcm
cfg80211              118349  3 brcmsmac,rt2x00lib,mac80211
battery                 8581  0
thermal                 6291  0
ac                      2337  0
k10temp                 1939  0
i2c_algo_bit            3653  1 radeon
thermal_sys             9868  3 video,processor,thermal
wmi                     6279  1 asus_wmi
psmouse                52466  0
videobuf2_vmalloc       1432  1 uvcvideo
atl1c                  22931  0
crypto                  4446  4 aead,crypto_algapi,mac80211,bluetooth
i2c_piix4               6680  0
snd                    35007  12 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
bcma                   14402  1 brcmsmac
button                  3393  0
hwmon                    889  4 radeon,asus_wmi,k10temp,thermal_sys
power_supply            5915  3 radeon,battery,ac
videobuf2_memops        1194  1 videobuf2_vmalloc
mousedev                7180  0
serio_raw               3042  0
soundcore               3537  3 snd
evdev                   6234  18
i2c_core               13465  6 radeon,drm_kms_helper,drm,videodev,i2c_algo_bit,i2c_piix4
rfkill                 10044  3 asus_wmi,bluetooth,cfg80211
snd_page_alloc          4763  2 snd_hda_intel,snd_pcm
sg                     17200  0
wifislax ~ #[/spoiler]
« Última modificación: 15-04-2012, 00:01 (Domingo) por USUARIONUEVO »
En línea

Conectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 15985
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #10 en: 14-04-2012, 23:16 (Sábado) »
modulo con los firmwares que busca el driver de broadcom

wifislax 4.1 beta 2 + firmwares

http://downloadwireless.net/modulos-fase-testing/wifislax-4.1/firmwares-broadcom.xzm
En línea

Conectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 15985
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #11 en: 14-04-2012, 23:22 (Sábado) »
Código: [Seleccionar]
bcma                   14402  1 brcmsmac
Código: [Seleccionar]
brcmutil                1864  1 brcmsmac
Código: [Seleccionar]
brcmsmac              443867  0
pero claro , como le falta el firmware...  ^-^

a ver si hay suerte de una vez.
En línea

inguaite

  • Visitante
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #12 en: 14-04-2012, 23:57 (Sábado) »
Recién hice lo de changes.xzm...

Ahora voy con esto.

Habría que cortar las líneas largas de los "códigos", deforman todo el ancho del hilo. Si no te son útiles las elimino...
En línea

Conectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 15985
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #13 en: 14-04-2012, 23:58 (Sábado) »
Cita de: inguaite en 14-04-2012, 23:57 (Sábado)
Recién hice lo de changes.xzm...

Ahora voy con esto.

Habría que cortar las líneas largas de los "códigos", deforman todo el ancho del hilo. Si no te son útiles las elimino...

ok , de momento puedes borrar, ya que todo apuntaba al firmware.

es un caos el tema broadcom , por que hay implicados hasta 4 drivers ...y encima cada uno con sus firms y peculiaridades varias.


HE MODIFICADO LOS POST , AÑADIENDO EL CHEAT  spoiler , PARA QUE ASI EL CODE ESTE OCULTO , Y SE ABRA SOLO SI ALGUIEN QUIERE VERLO.
« Última modificación: 15-04-2012, 00:02 (Domingo) por USUARIONUEVO »
En línea

Chumpy

  • Visitante
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #14 en: 15-04-2012, 00:13 (Domingo) »
Que sepas, USUARIONUEVO que aunque no tengamos una bradcom para probar seguimos el hilo dia a dia, y te apoyamos, no desesperes!!
Por otra parte, si hay algo que podamos hacer para hechar una mano solo pidelo!!


Supongo que te lo habrás leido entero, y no tengo ni la más remota idea de interpretar un dmesg, pero me ha llamado la atención esto:

[spoiler][  102.980493] Broadcom 43xx driver loaded [ Features: PMNLS ]
[  244.892246] usb 1-1: new high-speed USB device number 4 using ehci_hcd
[  245.293257] usb 1-1: reset high-speed USB device number 4 using ehci_hcd
[  245.520875] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[  245.521295] Registered led device: rt2800usb-phy1::radio
[  245.521326] Registered led device: rt2800usb-phy1::assoc
[  245.521357] Registered led device: rt2800usb-phy1::quality
[  245.521389] usbcore: registered new interface driver rt2800usb
[  282.342719] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  372.790560] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  373.066821] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[  373.142736] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  373.418852] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  376.531488] wlan0: authenticate with 00:23:f8:b5:86:43 (try 1)
[  376.533282] wlan0: authenticated
[  376.533358] wlan0: associate with 00:23:f8:b5:86:43 (try 1)
[  376.537047] wlan0: RX AssocResp from 00:23:f8:b5:86:43 (capab=0x431 status=0 aid=2)
[  376.537060] wlan0: associated
[  376.537072] wlan0: moving STA 00:23:f8:b5:86:43 to state 1
[  376.537080] wlan0: moving STA 00:23:f8:b5:86:43 to state 2
[  376.537087] wlan0: moving STA 00:23:f8:b5:86:43 to state 3
[  376.545911] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  387.426200] wlan0: no IPv6 routers present
[  503.457170] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[  503.457473] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  508.584014] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Down
[  514.066195] eth0: no IPv6 routers present[/spoiler]

Por que cuando intenta cargar la broadcom coge wlan0 en lugar the eth1??
En línea

Conectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 15985
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #15 en: 15-04-2012, 00:23 (Domingo) »
Cita de: Chumpy en 15-04-2012, 00:13 (Domingo)
Que sepas, USUARIONUEVO que aunque no tengamos una bradcom para probar seguimos el hilo dia a dia, y te apoyamos, no desesperes!!
Por otra parte, si hay algo que podamos hacer para hechar una mano solo pidelo!!


Supongo que te lo habrás leido entero, y no tengo ni la más remota idea de interpretar un dmesg, pero me ha llamado la atención esto:

[spoiler][  102.980493] Broadcom 43xx driver loaded [ Features: PMNLS ]
[  244.892246] usb 1-1: new high-speed USB device number 4 using ehci_hcd
[  245.293257] usb 1-1: reset high-speed USB device number 4 using ehci_hcd
[  245.520875] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[  245.521295] Registered led device: rt2800usb-phy1::radio
[  245.521326] Registered led device: rt2800usb-phy1::assoc
[  245.521357] Registered led device: rt2800usb-phy1::quality
[  245.521389] usbcore: registered new interface driver rt2800usb
[  282.342719] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  372.790560] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  373.066821] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[  373.142736] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  373.418852] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  376.531488] wlan0: authenticate with 00:23:f8:b5:86:43 (try 1)
[  376.533282] wlan0: authenticated
[  376.533358] wlan0: associate with 00:23:f8:b5:86:43 (try 1)
[  376.537047] wlan0: RX AssocResp from 00:23:f8:b5:86:43 (capab=0x431 status=0 aid=2)
[  376.537060] wlan0: associated
[  376.537072] wlan0: moving STA 00:23:f8:b5:86:43 to state 1
[  376.537080] wlan0: moving STA 00:23:f8:b5:86:43 to state 2
[  376.537087] wlan0: moving STA 00:23:f8:b5:86:43 to state 3
[  376.545911] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  387.426200] wlan0: no IPv6 routers present
[  503.457170] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[  503.457473] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  508.584014] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Down
[  514.066195] eth0: no IPv6 routers present[/spoiler]

Por que cuando intenta cargar la broadcom coge wlan0 en lugar the eth1??

pueden ser 2 cosas....

1- que tubiera puesta la usb
2-la mas probable ....el driver NO OFICIAL , si las monta como wlanX , permite monitor, inyeccion etc etc etc

el driver oficial las monta como ethx .
En línea

inguaite

  • Visitante
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #16 en: 15-04-2012, 00:24 (Domingo) »
SIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII!!!!!!!!!!!!!!!!!!!!!!!!!!!!

OLE,OLE OLE!!!!!!!!  >:( >:( >:( >:( >:( >:( >:( >:( >:( >:(

La reconoce a la primera como Wlan1 (la 0 es la Alfa)

Se deja cambiar la MAC sin errores.

Se pone en modo monitor y escanea.

Conecta y navega...

GRANDE USUARIONUEVO!!!!!!!!!!!!!  >:( >:( >:( >:( >:( >:( >:(
En línea

Conectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 15985
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #17 en: 15-04-2012, 00:24 (Domingo) »
miralo aqui

Código: [Seleccionar]
[  245.521295] Registered led device: rt2800usb-phy1::radio
[  245.521326] Registered led device: rt2800usb-phy1::assoc
[  245.521357] Registered led device: rt2800usb-phy1::quality
esta la usb conectada .
En línea

Conectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 15985
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #18 en: 15-04-2012, 00:25 (Domingo) »
Cita de: inguaite en 15-04-2012, 00:24 (Domingo)
SIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII!!!!!!!!!!!!!!!!!!!!!!!!!!!!

OLE,OLE OLE!!!!!!!!  >:( >:( >:( >:( >:( >:( >:( >:( >:( >:(

La reconoce a la primera como Wlan1 (la 0 es la Alfa)

Se deja cambiar la MAC sin errores.

Se pone en modo monitor y escanea.

Conecta y navega...

GRANDE USUARIONUEVO!!!!!!!!!!!!!  >:( >:( >:( >:( >:( >:( >:(









casi que me pongo a llorar y todo ........ POR FIN.

EL PLAN B , ERA COMPRARME UNA PUTX TARJETA CON BROADCOM.    >:D >:D >:D


YA PUEDO IRME A LA TUMBA AGUSTO :=)
En línea

inguaite

  • Visitante
Re: wifislax-4.1-beta-2 [pruebas broadcom y testing]
« Respuesta #19 en: 15-04-2012, 00:32 (Domingo) »
Cita de: USUARIONUEVO en 15-04-2012, 00:25 (Domingo)

YA PUEDO IRME A LA TUMBA AGUSTO :=)

Mas que a la tumba, a por unas birras...  ;D ;D ;D ;D

Muchas gracias por el esfuerzo en hacerla funcionar!!

Saludos
En línea
Páginas: [1] 2 3 4   Ir Arriba
« anterior próximo »
 

Si quieres tener la mejor experiencia posible de navegación y uso de la web activa y acepta nuestras políticas de privacidad y cookies. En caso contrario te recomendamos abandonar la web y buscar la información en otro sitio. Si quieres registrarte en el foro deberás aceptar las políticas de privacidad y las condiciones de uso. Learn more